Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: Canon IRC3200

  1. #1
    Senior Tech 100+ Posts
    Join Date
    May 2010
    Posts
    123
    Rep Power
    30

    Question Canon IRC3200

    Hi guys,
    I have a problem with maybe machine margin adjustment. I can scan/copy well when i placed papers on the mirror of the machine. But, when I using ADF, then I scan, I can't get full page of the documents; only in the middle. It's mean that, I only can scan/copy of the middle of the documents. help me how to adjust the ADF margin.

  2. #2
    Service Manager 2,500+ Posts
    Canon IRC3200

    skynet's Avatar
    Join Date
    Apr 2009
    Location
    You know by now
    Posts
    2,575
    Rep Power
    167
    You can try the doc stop adjustment in service mode that's, feeder / adjust / doc stop.

  3. #3
    Service Manager 10,000+ Posts
    Canon IRC3200

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    SERVICE MODE

    FEEDER>ADJUST>DOCST

    • Increasing the value makes the leading edge blank smaller.
    Adjustment –100 to 100 (0.337 mm units)
    Operation
    1) Place the document on the ADF document tray.
    2) Select the item, use the numeric keypad to change the setting value, then
    press the OK key to set it.
    3) Press the OK key again to deliver the document and stop it (aligned left)
    on the platen glass.
    4) Open the ADF carefully, and check the stop position of the document.
    Standard: Stop position L4 = 0 ± 1 mm
    L4: Distance from vertical size plate edge to document edge

    Dip-switch functions
    The dip-switch (DSW1) functions of the ADF controller PCB are as follows.
    Normal settings Normal operation status is when all bits are OFF.
    Document tray adjustment=
    1) Set bits 3 and 4 ON.
    2) Set the document tray to the following sizes and
    press the push switch.
    · A/B: A4
    · Inch: LTR
    3) Set the document tray to the following sizes and
    press the push switch.
    · A/B: A4R
    · Inch: LTRR
    4) Press the push switch (SW1) again and set all bits
    back to OFF
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here