Results 1 to 7 of 7
  1. #1
    Technician
    Join Date
    Jan 2011
    Location
    mclean, va
    Posts
    43
    Rep Power
    27

    canon ir7105 error code E000197-0000

    anybody know the meaning of this code?
    thanks!

  2. #2
    Service Manager 250+ Posts gensys's Avatar
    Join Date
    Jan 2011
    Location
    Yerevan, AM
    Posts
    324
    Rep Power
    30
    Portable Manual iR7105/7095/7086 Series
    Chapter 3 Error Code
    Search to internet......
    The Road will be Mastered by >>> the Going...

  3. #3
    Trusted Tech 50+ Posts macuk's Avatar
    Join Date
    May 2009
    Location
    worthing
    Posts
    90
    Rep Power
    31
    E197 is a laser motor communication fault

  4. #4
    Service Manager 10,000+ Posts
    canon ir7105 error code E000197-0000

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    Quote Originally Posted by tack View Post
    anybody know the meaning of this code?
    thanks!


    E197 error code.
    This code refers to a communication error with the laser scanner motor (M4).
    also check>>>

    1) Pull the separation / transfer corona unit out.
    2) Inspect the bias cable located to the right of the sep/trans assembly holder in the rear of the transport assembly.
    3) Tighten and adjust tube if needed ,confirm there is no short between the screw and cable
    see tech pub.>TP06-1.pdf

    or check>

    E197 can be cause by a pinched wire between the Video PCB and the Relay PCB. Check the wiring and cut wire ties coming from connector J1405 on the Video PCB. The part number for the harness is FM2-5427-000.
    Video.jpg

    Although this code refers to a communication error with the laser scanner motor (M4),
    it has been found that a fixing bias short will cause the E197.
    If the fixing unit was recently rebuilt, check to make sure that the orientation of the fixing bushings and bearings are in it's correct position.
    E197~1.jpg
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  5. #5
    Technician
    Join Date
    Jan 2011
    Location
    mclean, va
    Posts
    43
    Rep Power
    27
    turned out to be a bearing leaving metal filings in the back of the machine was causing a short. thank you to all whom responded. i appreciate it.

  6. #6
    Service Manager 10,000+ Posts
    canon ir7105 error code E000197-0000

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  7. #7
    Technician
    Join Date
    Jan 2011
    Location
    mclean, va
    Posts
    43
    Rep Power
    27
    thanks teckat!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here