The Paper Full Sensor Flag on the lower exit is missing, thats why the warning come out.
Just put some black tape on the Paper Full sensor PS15 to block the LED, fixed.
Thanks: 0
Likes: 0
Dislikes: 0
The Paper Full Sensor Flag on the lower exit is missing, thats why the warning come out.
Just put some black tape on the Paper Full sensor PS15 to block the LED, fixed.
just for points i did say this back on post 4 - also lack of black has to be drum clutch ...........(you have 4 so you can swap and test)
It looks like my reply went to the wrong topic, but I can advise about the missing black colour.
Check the connectors to the Black Drum, they are the primary charging and the developing bias, maybe it is bent, if these two do not connect to the drum unit then that colour is missing.
Also check the primary transfer roller in the intermediate transfer belt
Just put some black tape on the Paper full sensor PS15 to block the LED because the sensor flag is missing.
Or you can program the machine to deliver from tray B which still have the sensor flag.
I tried to sent private message to user spectraindo, but I am not sure that the PM come out (I do not see it in Sent items).
I need to set the paper path B for Canon IRC2880i in service mode, but I do not know how? Do you have any idea where in service mode I can set it? (I think it is the same as in IRC3380i).
Thank you very much for your help.
Originally Posted by spree
Those are set in user mode...Not Service.
Look under Additional Functions>Common Settings>Tray Designation.
I think it could be set pernamently in user menu?
OK, I check it. Thank you.
If you want to use the extra tray to the right of machine (One cover has to be removed and you need an additional tray)
you can set COPIER>OPTION>ACC >OUT-TRAY to "1"
/KingKogo
OK, but this extra tray is not at the copier. I try to put black tape on PS15 sensor, and when it will not work I make the paper path B.
Please I have next questions for Canon IRC2880i:
There is only Buffer Path Unit-E2 installed, but no Finisher Y1 or Saddle Finisher Y2:
1.) Do you think, when there is only Buffer Path Unit-E2 installed, that the delivery output tray will delivery paper to this Buffer Path Unit-E2? When yes, the paper can not move to Finishers, because no Finisher is installed (and the sensor PS15 relates with this paper path). Or the paper come out to the top of Buffer Path Unit-E2 ??? (I know there are two delivery output tray. Now I mean the delivery output tray which relates with this).
2.) When yes, how could I disable in service menu this Buffer Path Unit-E2 ??? I will remove it from machine. (Because when I unplug the connector from Buffer Path Unit-E2, turn ON machine: it gives ERROR - I forgot the number of error).
Many thanx for your help!
buffer.JPG
Reply With Quote
Bookmarks