DSC01188.JPGHELP!!!!!!!!!!!!!
i change this
DSC01189.JPG
i change this
DSC01192.JPG
i check this
DSC01193.JPG
even done yet, how?
DSC01188.JPGHELP!!!!!!!!!!!!!
i change this
DSC01189.JPG
i change this
DSC01192.JPG
i check this
DSC01193.JPG
even done yet, how?
Do you have inner finisher?
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Try to turn off the optional output tray function. Thats the output to the right coming out thru the upper door that youve changed.
COPIER > OPTION > ACC > OUTTRAY
Set the value to "0"
look like your missing exit sensor flag ,this happens when some either fit internal finisher or buffer and then converts back
zoraldinho
yes, it have it.
KingKogo
hoho, this was very usefull for me, i just start to do canon machine, the most weakness was at software
alex@wocltd.com
noted, will check it later, huh, yesterday checking this till night.
thanks all of you guys comment, appreciate~~
CHECK YOUR >
[21] Delivery Tray Full Sensor 2 (PS2A)
[22] Delivery Tray Full Sensor 1 (PS15)
Make sure they are not stuck
also check>COPIER>OPTION>USER> in LEVEL 2
TRAY-FLL
Setting the timing to issue an output-tray-full warning.
Settings
0: Issues an output-tray-full warning when all the delivery trays become full.
[Factory default/After RAM clear]
1: Issues an output-tray-full warning when all the specified trays become full.
TRAY FULL.JPG
COPIER>OPTION>ACC
OUT-TRAY No.3 delivery tray availability
This is mainly used when the No.2 or No.3 delivery unit is installed.
It is set to "1" when the No.3 delivery unit is installed.
Settings
0: Not available
1: Available
[Factory setting/value after clearing RAM: 0]
IN.JPG
COPIER>OPTION>ACC
OUT-TRAY
IN-TRAY Inner delivery tray availability
This sets the availability of the No.2 delivery tray.
It is set to "1" when the No.2 delivery tray is available.
Settings
0: Not available
1: Available
[Factory setting/value after clearing RAM: 0]
OUT.JPG
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Wow, nice presentation teckat !!! You are awesome~~!
i just check it, for the OUT-TRAY & IN-TRAY in ACC option, no metter i change it to 1 or 0 just will be the same
for COPIER>OPTION>USER> in LEVEL 2
TRAY-FLL
i can't find it, why??....-.-"
i change also -comment settings > printing priority
but even help.
i just open out this
DSC01194.JPG
and now my copier like this
DSC01196.JPG
still the same problems, i wonder to cry.......-.-"
If i unplug this connecter, machine run, but just paper jam after heater...(normal, jam at exit?)
DSC01193.JPG
so maybe just problem on setting?
i clear IMM once, just still the same problem......
Hi, just now i had try on this,
i close the sensor inside, the machine can be print.
but i will need to put back this thing
DSC01194.JPG
i need to sell the machine.....
if i add on finisher can solve it?????(now i think i catch some point..-.-")
thanks for teching...
Z1 Finisher install>
see below
Finisher-Z1.pdf
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks