the printer board
and onboard
apparently the problem is in the dc control
send to concert
eventually put the result
Hello friends
Thanks to assistance from all
discovered the defect iR7105
was on the main board (two boards with the same defect)
I got a third that had the same problem (and lucky)
Yesterday with a fourth main board the machine worked perfectly.
Thank you all
I think it is the hdd controller on the main controller pcb.
If you switch the main controller PCB from another machine you must use the original COUNTER PCB,BOOTROM and RAM, not from the other machine, otherwise you get an error.
Good luck.
issue solved by poster on 5/10/2011Hello friends
Thanks to assistance from all
discovered the defect iR7105
was on the main board (two boards with the same defect)
I got a third that had the same problem (and lucky)
Yesterday with a fourth main board the machine worked perfectly.
Thank you all
Wake up Coffee.JPG
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks