Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1
    Technician Dimacop's Avatar
    Join Date
    Apr 2009
    Location
    new jersey
    Posts
    44
    Rep Power
    18

    The mystery of the iR7105 V1

    I have two iR7105 V1
    (occurs in two iR7105)
    one occurred E602
    I changed the hd nothing done (perfect for this hd tested and installed on another machine)
    When I put on my machine
    E602 Direct
    and when I press the * 2 8 *
    he first of E602
    before download mode
    using the sst
    the hd format error
    not communicate with the hd
    now the two of
    even putting the hd with the system installed on another machine
    at first I invert the two boxes (main control)
    Is this the beginning of the problem
    someone already seen this


  2. #2
    Technician Dimacop's Avatar
    Join Date
    Apr 2009
    Location
    new jersey
    Posts
    44
    Rep Power
    18
    I Can Do

    remove the battery from the main control
    to see if it restarts the PCB ?????

    I think it was reversed because the control card in iR7105
    I put the main control (A) in the machine (B)
    I put the main control (B) of the machine (A)
    later the error occurred

    This may have been my mistake?


  3. #3
    Technician developer dumper's Avatar
    Join Date
    Oct 2008
    Posts
    21
    Rep Power
    19
    why would you not update to V2 machine?


  4. #4
    Field Supervisor 500+ Posts tinnyjay's Avatar
    Join Date
    Oct 2009
    Location
    Tirana
    Posts
    592
    Rep Power
    0
    Quote Originally Posted by Dimacop View Post
    I have two iR7105 V1
    (occurs in two iR7105)
    one occurred E602
    I changed the hd nothing done (perfect for this hd tested and installed on another machine)
    When I put on my machine
    E602 Direct
    and when I press the * 2 8 *
    he first of E602
    before download mode
    using the sst
    the hd format error
    not communicate with the hd
    now the two of
    even putting the hd with the system installed on another machine
    at first I invert the two boxes (main control)
    Is this the beginning of the problem
    someone already seen this
    Could be a problem like this,but i do not know if this is allowed at IR7105
    Check it :
    Need to add new HDD to HDDFormat.itf list

    "Who loves the roses,must also bear thumbs"

  5. #5
    Service Manager 10,000+ Posts
    The mystery of the iR7105 V1

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,153
    Rep Power
    213
    Quote Originally Posted by Dimacop View Post
    I Can Do

    remove the battery from the main control
    to see if it restarts the PCB ?????

    I think it was reversed because the control card in iR7105
    I put the main control (A) in the machine (B)
    I put the main control (B) of the machine (A)
    later the error occurred

    This may have been my mistake?

    what exactly are u trying to do ??
    how many HDD's are playing around with/ do both machines have an issue ?

    Try and perform these HD Clears /go into service mode COPIER>FUNCTION>SYSTEM
    Select CHK-TYPE and set it to 1 and press ok.
    Then select HD-CLEAR and press ok.
    Select CHK-TYPE and set it to 2 and press ok.
    Then select HD-CLEAR and press ok.
    Select CHK-TYPE and set it to 3 and press ok.
    Then select HD-CLEAR and press ok.
    Select CHK-TYPE and set it to 4 and press ok.
    Then select HD-CLEAR and press ok.
    After completing this procedure, power cycle the imageRUNNER and re-enter any user settings. If the error still occurs format the Hard Drive with the Service Support Tool and reinstall the System Software.

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  6. #6
    Technician
    Join Date
    Mar 2009
    Location
    Kuala Lumpur
    Posts
    20
    Rep Power
    18
    Try to change the boot room,i had this problem last week,tried everything but not avail,at last change boot room,problem solved


  7. #7
    Technician Dimacop's Avatar
    Join Date
    Apr 2009
    Location
    new jersey
    Posts
    44
    Rep Power
    18
    what I have done
    tested on another machine
    dimm
    bootrom
    hd
    everything working perfectly
    when you put on my machine
    my two machines
    E602 error again
    how to upgrade a machine from V1 to V2?
    I have firmware v1 and v2
    but never installed
    V1 V2 system

    even getting into the download mode
    I can not do the installation

    and I do not have access to the service mode
    installing it on another machine.
    the system works perfectly in my not
    I'm afraid to try on another machine and another with the same problem


  8. #8
    Service Manager 10,000+ Posts
    The mystery of the iR7105 V1

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,153
    Rep Power
    213
    if u tried the<
    dimm
    bootrom
    hdd, on another 7105 and did not receive an error 602,

    u have another issue
    ,and it's not firmware related

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  9. #9
    Technician Dimacop's Avatar
    Join Date
    Apr 2009
    Location
    new jersey
    Posts
    44
    Rep Power
    18
    I have some pictures of the problem.

    http://img819.imageshack.us/i/28032011077.jpg/
    http://img543.imageshack.us/i/28032011081.jpg/
    http://img858.imageshack.us/i/28032011083.jpg/
    http://img545.imageshack.us/i/28032011086.jpg/

    Already tested the hd and it is working

    the model of hdd that came in the machine
    MHV2040AH believe that this model has the hd format
    I'll try today with a Toshiba MK4026GAX

    when I try to enter the download mode
    stays on the screen the two
    download mode and E602-001
    never see it

    the machine has all the information to be a version V1
    but in SST and that she mosta a V2 version
    more when I try to install the firmware on Error
    in HD format.


  10. #10
    Service Manager 10,000+ Posts
    The mystery of the iR7105 V1

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,153
    Rep Power
    213
    If u tested this HDD in another 7105 and it boots up /and functions with no errors.

    u have a bigger issue to deal with on 7105

    make sure u have only ONE Ver. of the SST on Laptop


    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here