Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: irc3200 - adf

  1. #1
    y_us1982
    Guest

    irc3200 - adf

    does anyone had faced this kind of problem? my irc3200 adf paper stopper are always facing down. like normal adf, the stopper are up, it goes down only when the first paper are sliding down to scan and it goes up again when the second paper are ready to scan. the stopper i mean is as point with screw driver.
    Attached Images Attached Images

  2. #2
    Service Manager 10,000+ Posts
    irc3200 - adf

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    are your dip switches in correct position
    >Set all bits on the dipswitch (DSW1) OFF. {UP}

    dips.JPG
    On- in different positions are used for testing

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Service Manager 1,000+ Posts
    irc3200 - adf

    charm5496's Avatar
    Join Date
    Apr 2008
    Posts
    2,388
    Rep Power
    64
    if your dip switches are in the correct position and you have cycled the power and the problem persist I would take and replace the seperation drive assm.
    FG6-3963-110

    FYI...this is not an easy task to do. Review the manual and take your time replacing this unit.
    Accidents don't just happen. They must be carelessly planned.

  4. #4
    Service Manager 10,000+ Posts
    irc3200 - adf

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    the drive gears in Separation Drive Assembly can be broken. This can cause the pick-up roller to stay in the down position and not lift back up.


    it is easier to replace the entire DOCUMENT PICK-UP ASSEMBLY/ take off a few screws pop it off/pop new one on-
    then the Separation Drive Assmby

    check if u have a B1 or K1
    <DADF-B1>
    ZSB xxxxx (AB)
    ZSC xxxxx (Inch/A)
    ZSD xxxxx (A)
    ZSE xxxxx (AB/Inch)
    <DADF-K1>
    XKW xxxxx (AB)
    XKX xxxxx (Inch/A)
    XKY xxxxx (A)
    XKZ xxxxx (Inch/AB)
    if u don't put that Sep drive unit in the correct way/ u can re-crack the gear/
    DF1.JPG

    it also takes up to much time

    Also check this picture below
    ensure that the actuator for the pickup roller is set as indicated in the photo.
    /
    If not set this way your pick-up rollers will be locked in down position
    557-5742_IMG.JPG
    Last edited by teckat; 04-04-2011 at 05:42 AM.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here