Pressure Roller is in good shape but the belt is torn. Can you buy just the belt and does anyone have the part number?
Pressure Roller is in good shape but the belt is torn. Can you buy just the belt and does anyone have the part number?
If you're referring to the fixing film then the only number I have is a Katun number which is 29129. That is just the film and the lube for it. I don't believe that Canon sells just the film by itself, you would have to order the whole fixing film ass. part # FM2-1793-020.
Totoro
canon does not sell just the film and everyone who tries to save a couple of dollars by just buying the film usually ends up buying the entire film assembly because the film is pain in a$$ to replace and get it to work properly. Just my .02
Accidents don't just happen. They must be carelessly planned.
Charm and I are on the same page on this,, unless your labor is bone cheap, the savings of going with the film long term are eaten up by the extra service visits generated by using just an aftermarket film and grease. It is far more reliable to use the fixing film assembly that totoro mentioned...
Add in my 2 cents worth and you now have .04!! ;-)
I do quite well on rebuilt iR-3570 fusers. I don't know why you wouldn't rebuild them. Every one has worked and lasted the expected life. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
What's the cost difference on just the film as opposed to the fixing film assy?
Last edited by CanonSco; 04-09-2011 at 07:54 PM. Reason: single malt
Yes, I am a nerd.
Gaming PC - check. Raspberry Pi - Check. Custom ROM on phone - check. Thick glasses - check.
The 29129 film is about $30.00 us The assy is about $70.00 us dollars.
We use a lot of the films, they work good, no problems.
I don't know the exact costs here in Oz. but the difference easily covers the labour, and the results with the Katun film are fine.
part number for fixing film is FM2-1812
Bookmarks