Thanks:
0
Likes:
0
Dislikes:
0
-
irC3200 - prepare a new fixing unit
my irc3200 displayed "prepare a new fixing unit" at the bottom. i had replace the fixing unit with the new one but the display still exist. even with that message, my machine still can run in a good condition but my customer always argue with that message. is there a way how to erase that message? does anyone had this kind of prob?
-
Service mode- Level 1
COPIER>COUNTER<DRBL-1>FX-UNIT
<Clearing counter values>
1) Select the item to clear, displaying it in reverse.
2) Press the clear key on the operation panel.
• The counter is cleared, resetting it to “00000000”.
FX-UP-RL
Number of sheets that have passed through fixing roller (count value is
stored in controller).
FX-LW-RL
Number of sheets that have passed through pressure roller (count value is
stored in controller).
FX-UNIT
Number of sheets that have passed through fixing unit (count value is stored
in controller).
FX-UP-FR
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks