why did u do a dc-con clear ????
did u put back all the settings from your P PRINT print out ??
why did u do a dc-con clear ????
did u put back all the settings from your P PRINT print out ??
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
I didn't clear, it came in cleared. I put the values back in.
Had some CQ issues turned out to be the transfer belt. Interface is plugged in but not working. Is there a way to initialize the sensor?
The input voltages from the imageRUNNER to the Paper Deck Controller at J3, pin 1 measures 5 VDC, and J3, pin 2 measures 24 VDC. Proper voltage needs to be supplied to the Paper Deck Controller.
Try e-seating the communication cable at J485 on the Pedestal Controller
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
is the cassette pedestal plugged in ??
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Did you know that the main body of the cassette on the 5185 and 3570 are the same thing.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks