Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Technician
    Join Date
    Jan 2011
    Location
    mclean, va
    Posts
    43
    Rep Power
    14

    Canon ir7105, imagepass S2 wont boot.

    the rip wont progress past the second "please wait" when i power the controller

    any suggestions?

    thanks!!


  2. #2
    Service Manager 1,000+ Posts
    Canon ir7105, imagepass S2 wont boot.

    charm5496's Avatar
    Join Date
    Apr 2008
    Posts
    2,344
    Rep Power
    48
    if everything is configured correctly or was working prior to this I would reload firmware on the S2. If you are installing this S2 for the first time on the 7105 then you need change a few things in order to get them to talk.

    You must have a "c" boot rom installed along with the interface board that comes with the S2
    Your img-cont setting must be set to a 4
    you have to use a crossover cable between the two devices in order for them to talk properly

    Accidents don't just happen. They must be carelessly planned.

  3. #3
    Technician
    Join Date
    Jan 2011
    Location
    mclean, va
    Posts
    43
    Rep Power
    14
    yes everything was working correctly yesterday and was shut down. today i turned it on and that is when the boot failure occurred.
    i tried multiple restarts and removing, reinstalling the memory and removing all cables.

    i found this site. is it possible this is the firmware i will need to reload firmware?

    http://canon.codehost.com/canon_devices.php

    BrightQ Pro 2.5.1 linux?

    Last edited by tack; 04-14-2011 at 07:44 PM. Reason: new information

  4. #4
    Service Manager 10,000+ Posts
    Canon ir7105, imagepass S2 wont boot.

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,150
    Rep Power
    213
    Quote Originally Posted by tack View Post
    yes everything was working correctly yesterday and was shut down. today i turned it on and that is when the boot failure occurred.
    i tried multiple restarts and removing, reinstalling the memory and removing all cables.

    i found this site. is it possible this is the firmware i will need to reload firmware?

    Canon imageRUNNER: Supported Unix and Linux Operating Systems

    BrightQ Pro 2.5.1 linux?
    Remove and re-seat the C Boot Rom-
    imageRUNNER 7105/7095/7086
    C=Copier Boot Rom/FM2-5435-000

    There was a COMPOSITE PATCH for the imagePASS-S2 v2.0 / v2.01, from 2009 that needed to be installed, that addressed many issues. see pub.
    TP09.pdf



    U need your Fiery S2 Disks/ or the SST w/7105 Firmware in it.


    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  5. #5
    Service Manager 1,000+ Posts
    Canon ir7105, imagepass S2 wont boot.

    charm5496's Avatar
    Join Date
    Apr 2008
    Posts
    2,344
    Rep Power
    48
    Quote Originally Posted by tack View Post
    yes everything was working correctly yesterday and was shut down. today i turned it on and that is when the boot failure occurred.
    i tried multiple restarts and removing, reinstalling the memory and removing all cables.

    i found this site. is it possible this is the firmware i will need to reload firmware?

    Canon imageRUNNER: Supported Unix and Linux Operating Systems

    BrightQ Pro 2.5.1 linux?
    This has nothing to do with your issue. You need to reload S2 for starters and then possibly the 7105 to take it to the latest version.
    How exactly was the S2 shut down?

    Accidents don't just happen. They must be carelessly planned.

  6. #6
    Technician
    Join Date
    Jan 2011
    Location
    mclean, va
    Posts
    43
    Rep Power
    14
    thanks, yes i dont have the disk. is it possible to download?
    the s2 was shut down as normal from the screen prompts, waiting for the command the system is safe to shut down. then the power button to off.


  7. #7
    Service Manager 1,000+ Posts
    Canon ir7105, imagepass S2 wont boot.

    charm5496's Avatar
    Join Date
    Apr 2008
    Posts
    2,344
    Rep Power
    48
    You will probably need to order the CD's from somewhere or see if someone can send you a link to download them from an FTP site. I personally don't get involved in things of that nature, but others guys do from time to time. You may want to give your local dealership a call and see if they will sell you a copy.

    Accidents don't just happen. They must be carelessly planned.

  8. #8
    Service Manager 10,000+ Posts
    Canon ir7105, imagepass S2 wont boot.

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,150
    Rep Power
    213
    Quote Originally Posted by tack View Post
    thanks, yes i dont have the disk. is it possible to download?
    the s2 was shut down as normal from the screen prompts, waiting for the command the system is safe to shut down. then the power button to off.

    U need to contact Canon for disk
    see PDF>imagePass S2.pdf


    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  9. #9
    Technician
    Join Date
    Jan 2011
    Location
    mclean, va
    Posts
    43
    Rep Power
    14
    thank you!


  10. #10
    Service Manager 10,000+ Posts
    Canon ir7105, imagepass S2 wont boot.

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,150
    Rep Power
    213
    Quote Originally Posted by tack View Post
    thank you!
    install & guide S1- same as S2
    S1_I&SG.pdf


    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here