Thanks:
0
Likes:
0
Dislikes:
0
-
Trusted Tech
50+ Posts
- Rep Power
- 27
E197 on iR1020 with e-maintenance
Hi Everybody!
We have a 85 different Canon machines all with e-maintenance in a customer, including 25 pieces of iR1020. A some of iR1020 complaining about E197 error code about twice a months. Calling the customer he/she says haven't saw that error code, everything is allright. We have freshed the firmware to the latest one, but the error mails still came back.
Here is the message detail from e-maintenance:
Product Name: iR1020
Device ID: DQQ16xxx
Address: N/A
Device Installation Location: xxxxxxxxxxxxx VI.609.
Tel: +361xxxxxxxx
Occurred: 20-04-2011 16:06
Error Code: E197 - 0000
Error Description: Erroneous communication between the DC controller PCB and image processor PCB was detected.
Have anybody experienced with this problem?
Thank you for your help.
-
Check Ribbon Cable between the DC Controller and the Image Processor
Check your wall outlet for proper voltage=in your Country
Neutral to Hot
Hot to Ground
Ground to Neutral-should be 0v/0.5v
Install a Line Filter on effected machines to reduce electrical issues
poor grounding can damage Main Controller, which contributes to poor communications-
if E187 happens on power on/could be a defective Power Supply
Canon recommends dedicated lines on imageRunners, that could be costly, but it eliminates issues
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
-
Trusted Tech
50+ Posts
- Rep Power
- 27
Thanks Teckat!
I will check this.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks