Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Hamid
    Guest

    how to change the fuser on Canon Imagerunner C3200

    I am going to work for the first time on Canon Imagerunner C3200, could somebody tell me how to change the fuser assy.

  2. #2
    Service Manager 1,000+ Posts
    how to change the fuser on Canon Imagerunner C3200

    charm5496's Avatar
    Join Date
    Apr 2008
    Posts
    2,388
    Rep Power
    64
    If you are just swapping the assembly it is two screws holding the fuser in one in the front and one in the back. Always check the NIP pressure when installing a new fixing unit.
    Accidents don't just happen. They must be carelessly planned.

  3. #3
    Hamid
    Guest
    I am sorry, i don't want to be a pain, but how to check the NIP pressure.

  4. #4
    Lead Service Technician 1,000+ Posts mrfixit51's Avatar
    Join Date
    Oct 2008
    Location
    Clinton, Iowa
    Posts
    1,976
    Rep Power
    54
    Enter service mode, and navigate to copier>function>fuser>nip-chk


    <FIXING>
    Automatically adjusts fixing unit.
    NIP-CHK
    Fixing nip width automatic measurement output.
    Operation 1) If the finisher is connected, remove it from the copier and pull out the
    method lattice cable.
    2) Place A4 (LTR) size paper in the manual feed tray.
    3) Press the OK key (the paper in the manual feed tray is fed).
    4) When the fed paper is pressed by the fixing roller, it stops, and is delivered
    about 15 seconds later.
    5) Check that the nip width of the delivered paper is the standard value.
    F05-701-02
    6) If the standard value isn’t met, adjust the value. See the Printer Manual,
    Chapter 6, “Fixing System”, 4. “Disassembly and assembly”, 4.2 “After
    fixing unit disassembly”.
    7) After completing the operation, output a test print
    (COPIER>TEST>PG>TYPE (6): Grid).
    Remark The paper is delivered from the side paper delivery tray.

  5. #5
    Service Manager 1,000+ Posts
    how to change the fuser on Canon Imagerunner C3200

    charm5496's Avatar
    Join Date
    Apr 2008
    Posts
    2,388
    Rep Power
    64
    What mrfixit said is spot on. Thanks for the assist!!!
    Accidents don't just happen. They must be carelessly planned.

  6. #6
    Lead Service Technician 1,000+ Posts mrfixit51's Avatar
    Join Date
    Oct 2008
    Location
    Clinton, Iowa
    Posts
    1,976
    Rep Power
    54
    Quote Originally Posted by charm5496 View Post
    What mrfixit said is spot on. Thanks for the assist!!!
    You are welcome my friend!!

  7. #7
    Service Manager 10,000+ Posts
    how to change the fuser on Canon Imagerunner C3200

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    Quote Originally Posted by mrfixit51 View Post
    You are welcome my friend!!


    Don't forget to remove/disable the finisher from machine-before nip check


    & make sure to put on the green pressure release handle

    note> old handles will not fit on new models
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here