Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5

Thread: ir5055n (00094)

  1. #1
    Technician
    Join Date
    May 2011
    Posts
    45
    Rep Power
    0

    Question ir5055n (00094)

    Hi,
    I am having a problem with IR5055n feeder (dadf s1). it does not work at all every time i put a docment in it to make a copy a jam alarm appears on the screen and it can not be recovered till i turn the machine off.jam code (00094) with no display of the sensor no. or the type of jam. I cleaned all the sensors and i executed sensor initialization in the service mode but no use of it . please help?


  2. #2
    Trusted Tech 50+ Posts
    Join Date
    Apr 2011
    Location
    birmingham
    Posts
    53
    Rep Power
    14
    i've had similar issue on 5055 and 5185.on both m/c's i ended up dis and reconnecting the reader controller in the optics.i don't know if this will work for you but it's worth a shot..


  3. #3
    Service Manager 10,000+ Posts
    ir5055n (00094)

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,206
    Rep Power
    215
    imageRUNNER 5050 / 5055 / 5065 / 5070 / 5075 / 5570 / 6570
    imageRUNNER C5058 / C5068 / C5800 / C5870 / C6800 / C6870
    DADF-M1
    DADF-S1 0094 Jam Code
    The document feeder is generating a 0094 jam code that will not clear until the machine is power cycled. A 0094 jam code can be generated by any paper path sensor in the document feeder.


    Returning the prism for PI7(DADF M1) / PCB2(DADF S1) to its proper position, resolved this issue.


    See photo below for location of sensor prism.







    Check if the Document Feeder is sitting correctly on the platen
    Check the the left hinge position-

    from old pub>>

    machine displays a 0094 jam code when the DADF is used. At the start of operation the presence of an original has been detected by a sensor in the paper path. The sensors that generate the code are PCB2 the Post separation sensor pcb, PCB3 the Read sensor, PCB4 the Delivery/reversing sensor pcb.

    Check the state of the DADF-S1 optical sensors (PCB 2 - Post Separation, PCB 3 - Read and PCB 4 - Delivery/Reversal) in service mode level 1 > Copier > I/O > Feeder, state of PCB's will indicated if paper is present-
    I/O address for PCB4 is P006 - bit 1 ; a 1 indicates that paper is present.

    I/O address for PCB 2 is P004 - bit 4; a 1 indicates that paper is present.

    I/O address for PCB 3 is P006 - bit 4; a 1 indicates that paper is present.

    Solution :
    tech had to replace both PCB2 and PCB4. All three sensors have the same part number FM2-1022-000.
    DADF.jpg

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  4. #4
    Technician
    Join Date
    May 2011
    Posts
    45
    Rep Power
    0
    Thank you for the information but i`d like to inform you with the following data which i noticed in the service mode.service mode level 1>feeder >display>SPSN LMN (0 or 254) and SPSN RCV 54 and the same for RDSN and DRSN do you have an explaination?


  5. #5
    Service Manager 10,000+ Posts
    ir5055n (00094)

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,206
    Rep Power
    215
    Quote Originally Posted by Mina Banoub View Post
    Thank you for the information but i`d like to inform you with the following data which i noticed in the service mode.service mode level 1>feeder >display>SPSN LMN (0 or 254) and SPSN RCV 54 and the same for RDSN and DRSN do you have an explaination?


    forget about that crap- go in and check the I/O address info above


    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here