clc 5151

[xcopytech]

Have CLC 5151 with E110-0101.
Tried with new laser but still same.

[charm5496]

E110 sub codes descriptions are as follows:

1st line: Always 0

2nd line: Station where the error occurred (1: Y, 2: M, 3: C, 4: K)

3rd line: Main unit status when the error occurred (0: Activating, 2: BD control 1, 3: BD control 2, 4: Changing the speed, 3: Operating steadily)

4th line: Polygon control status (0: Suspension, 1: FG rotation, 2: BD control 1, 3: BD control 2, 4: BD Control 3, 5: BD control 4, 6: Phase locked)

If you replaced the yellow laser then I would look at DC controller #1 next.

[teckat]

Have CLC 5151 with E110-0101.
Tried with new laser but still same.

The polygon motor stopped, or polygon does not reach the specified
number of rotations.

(1)Check whether the harness is not removed.
(2)Replace the scanner unit.
(3)Replace the harness.
(4)Replace the DC controller PCB 1 (IMG).
(5)Replace the power unit.

as charm5496 posted> u have a rotation issue on Yellow

[vigour]

This is a slightly different subcode, in case you made a mistake.

[xcopytech]

Thanks everyone for inputs.
Know that yellow laser have problem, tried with new one but have no luck.
Will try with DC controller PCB 1 and post result.

Thanks.

[charm5496]

good luck. let us know how things work out.