i gate the problem canon ir-105 error E000218-0000 any body help me.
i gate the problem canon ir-105 error E000218-0000 any body help me.
Last edited by tariq65; 05-19-2011 at 11:05 AM. Reason: wrong entry error cod
check your scanlamp as it is probably not working.
Here is further information for you:
Problem :
E218 code. The code continues to occur even after the Scanning Lamp has been replaced.
Solution :
Try the following:
- Check J1003 on the Lamp Inverter PCB to determine if the voltage to the lamp is missing.
- If the voltage at J1003 is missing, then check J1001, pins 1 & 2, for 40 volts and J1002 for the proper signals coming from the Reader Controller. If the measurements are correct at J1001 and J1002, then replace the Lamp Inverter PCB.
- If 40 volts is missing at J1001 of the Lamp Inverter PCB, it may be necessary to replace the Lamp Inverter Power PCB and / or the Relay PCB.
- If the signals at J1002 of the Lamp Inverter PCB are incorrect, it may be necessary to replace the Reader Controller.
- Try reseating the connectors for the PCB's previously mentioned before replacing them.
- Also, check the wiring visually and with continuity checks between all of the previously mentioned PCB's.
Accidents don't just happen. They must be carelessly planned.
error E000218-0000 or
E000128-0000
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
thank you sir problem scanner lamp when i start the copy no glow lamp and no move scanner and blank paper come out then give error E000218-0000 .
Bookmarks