Results 1 to 4 of 4
  1. #1
    Trusted Tech 50+ Posts tariq65's Avatar
    Join Date
    Jun 2010
    Location
    Lahore
    Posts
    81
    Post Thanks / Like
    Rep Power
    0

    canon ir-105 error E000128-0000

    i gate the problem canon ir-105 error E000218-0000 any body help me.

    Last edited by tariq65; 05-19-2011 at 12:05 PM. Reason: wrong entry error cod

  2. #2
    Field Supervisor 1,000+ Posts


    charm5496's Avatar
    Join Date
    Apr 2008
    Posts
    2,210
    Post Thanks / Like
    Rep Power
    40
    check your scanlamp as it is probably not working.

    Here is further information for you:

    Problem :
    E218 code. The code continues to occur even after the Scanning Lamp has been replaced.

    Solution :

    Try the following:
    • Check J1003 on the Lamp Inverter PCB to determine if the voltage to the lamp is missing.
    • If the voltage at J1003 is missing, then check J1001, pins 1 & 2, for 40 volts and J1002 for the proper signals coming from the Reader Controller. If the measurements are correct at J1001 and J1002, then replace the Lamp Inverter PCB.
    • If 40 volts is missing at J1001 of the Lamp Inverter PCB, it may be necessary to replace the Lamp Inverter Power PCB and / or the Relay PCB.
    • If the signals at J1002 of the Lamp Inverter PCB are incorrect, it may be necessary to replace the Reader Controller.
    • Try reseating the connectors for the PCB's previously mentioned before replacing them.
    • Also, check the wiring visually and with continuity checks between all of the previously mentioned PCB's.


    Accidents don't just happen. They must be carelessly planned.

  3. #3
    Field Supervisor 2,500+ Posts


    zoraldinho's Avatar
    Join Date
    Mar 2008
    Posts
    2,970
    Post Thanks / Like
    Rep Power
    52
    error E000218-0000 or
    E000128-0000




    A little knowledge is a dangerous thing

    Click here to be sure



  4. #4
    Trusted Tech 50+ Posts tariq65's Avatar
    Join Date
    Jun 2010
    Location
    Lahore
    Posts
    81
    Post Thanks / Like
    Rep Power
    0
    thank you sir problem scanner lamp when i start the copy no glow lamp and no move scanner and blank paper come out then give error E000218-0000 .


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here