Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6

Thread: IRC3200

  1. #1
    Senior Tech 100+ Posts
    Join Date
    May 2010
    Posts
    123
    Rep Power
    30

    Question IRC3200

    Hai guys,

    I have problem with IRC3200.

    When I print/copy the output result is differ compared to original (colour 50% differ).
    I tried to calibrate the colour registration, but result as attached.

    any idea?

    Thank you. irc3200.JPG

  2. #2
    Service Manager 1,000+ Posts
    IRC3200

    charm5496's Avatar
    Join Date
    Apr 2008
    Posts
    2,388
    Rep Power
    64
    looks like you could use an ITB cleaner blade for the dirty streaks and possibly a magenta drum for the poor quality in that color.

    I wouldn't run auto gradation or calibrate until your output is clean.
    Accidents don't just happen. They must be carelessly planned.

  3. #3
    Field Supervisor 500+ Posts Luther's Avatar
    Join Date
    May 2006
    Location
    crystal lake ,Illinois
    Posts
    682
    Rep Power
    44
    How old are the drums? they look a little worn especially magenta...check drum life

  4. #4
    Service Manager 10,000+ Posts
    IRC3200

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    Agree with all other reply's on your post/

    Probably need to clean inside entire Printer/Remove Cleaner Blade unit/ Remove all Drums Toner/ITB UNIT/Slide out Fuser unit & Remove Manual feed unit/& all Cassettes= Gut Printer/ is is easier to clean out all that waste toner spill / u also need to look in and Vacuum out that guide rail that the Cleaning Blade unit slides into.

    also u Need to remove ITB Sheet/clean or replace if old/ clean those ITB metal plates when removed.May be best to replace entire Cleaner Unit
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  5. #5
    Senior Tech 100+ Posts
    Join Date
    May 2010
    Posts
    123
    Rep Power
    30
    Thank you. I ordered parts as suggested two days ago.

  6. #6
    Service Manager 10,000+ Posts
    IRC3200

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244
    Quote Originally Posted by msmy View Post
    Thank you. I ordered parts as suggested two days ago.

    u still need to strip down printer and clean inside,
    don't take a band-aid approach
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here