hello guys any body can share me the most common parts replace on this machine or commonly damage.pleased also the part #. thanks.
hello guys any body can share me the most common parts replace on this machine or commonly damage.pleased also the part #. thanks.
there is no glory without sacrifice
You want that gift wrapped too?
thanks canon tech. i heard that this machine are not good as ir 5010 and 5020 series is that true? do its fixing assy always ruined?
there is no glory without sacrifice
upper fuser gear and clips break, causing ecodes
you get e001, 002, 003, 004, caused by mechanical or other mysterious problems..
you can rebuild completely and still get e001 again.
therenis a system software upgrade for e002 dc-con 35.01
thanks guys. im not realy familiar on this machine in looking forward on the ir advance 6000 series but not yet launch here in our country. what can you say on this machine guys?
there is no glory without sacrifice
so far no real problems with advance 6000.
The fuser is an "improved" version of the 5570
I saw, and heard of a few e001 and other fuser codes.
Teckat posted some bulletins for 6000-- see them.
There were some earlier bulletins about pinched wires at the back of transport , fix it with a protective mylar.
thanks vigour i hope that ir advance 6000 is as good as the older ir 5000 series.
there is no glory without sacrifice
Bookmarks