Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    nagaraj124
    Guest

    Smile Canon IR-5570 / 6570

    I have the error E-0000061-001 in IR-5570. I have replaced the primary and Transfer Corona wires. Still the problem remains same.

  2. #2
    Trusted Tech 50+ Posts
    Join Date
    Apr 2011
    Location
    birmingham
    Posts
    53
    Rep Power
    27
    switch off potential control and diagnose from there,if the machine works and print qualty is fine you may have a dirty or faulty potential control sensor/pcb.

  3. #3
    Trusted Tech 50+ Posts Dedy.P's Avatar
    Join Date
    Dec 2009
    Location
    Jakarta
    Posts
    67
    Rep Power
    0
    this is for you
    Attached Files Attached Files

  4. #4
    KCTech
    Guest

    Cover

    Remove the front cover that you have to remove to gain access to your Primary and PO corona assys. On that cover is a plastic post that engages the laser shutter, be sure that the post isn't broken also be sure that the left tab of that cover where it screws to the main body isn't broken. Basically check post and make sure that cover has zero play in it, replace accordingly.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here