iRC3220 Hangs up intermittently

[mrfixit51]

I cant really see what the fuser got to do with it? But I will check it of course.

Glad you seemed to resolve your problem,,, what the fuser temp has to do with it is simple, the documents would fail to print if it was not at operating temp. All kinds of DC controller as well as main controller "brain farts" are often temporarily cleared up by a cold start...

[KingKogo]

Interesting,MN Con clear shouldnt blow away network settings. As long as it works!!!

It does clear them, for sure. On a machine with a imagepass it wont, naturally.

[teckat]

Thx Teckat! I executed a MN-CON clear and loaded the latest system on the machine. All the values on P-PRINT were the same after. Network settings were gone but I made a backup via RUI prior to the clear so it was easy to restore everything. DRBL counters were zeroed but that doesnt really matter. The customer hasnt called back so it seems to work fine!

Many thanks/ King Kogo

Thanks, and good luck

[Canuck]

Mcon clear does not delete network settings. The RAM is cleared,image data is lost,BOX is lost, but network settings remain. MMI clear will blow away network settings(user settings)

[KingKogo]

Mcon clear does not delete network settings. The RAM is cleared,image data is lost,BOX is lost, but network settings remain. MMI clear will blow away network settings(user settings)

"Alright then, lets call it a draw" ;-)

Really strange though, they were gone.... Tried it on a 2880 yesterday and it cleared out network settings. Difference between models? Where is network settings stored?