Thanks: 0
Likes: 0
Dislikes: 0
Hai guys,
I have a problem with IRC2880i, which is the output colour is differ then original. Please see attachment. Any ideas how to solve this prob? Thank you.
Chromatogram-wash0001.JPG
the color should be green, however its look like rainbow color...
Usually is drum issue.Print PG-10 in service mode test post a pic and we will see whats wrong.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Make sure your laser mirrors are clean. There should be a blue tool on the inside of the front door and instructions on how to use it.
looks like a yellow drum issue, but as zoraldinho says print pg -10 in service mode and it will give you a definite answer
Just go into service mode,hit COPIER, then misc and read the drum life. If the drums are ok do Pascal(auto gradations).As stated the test print will help
tq guys. I'll do it as suggested today.
Dear All,
Attached is a PG-10. Please advise. tq.
img-525102259-0001.jpg
If you clean laser mirrors,check yellow drum life.(replace yellow drum)
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Hi msmy, betul dah tu drum kuning ade prob.
Change yellow drum
Reply With Quote
Bookmarks