Thanks: 0
Likes: 0
Dislikes: 0
In the lower feed section there is a shaft and a one way gear. They go bad and the origanal does not feed. All I need is the part # for the shaft and one way gear. I have the service manual but not the parts manual.
Thanks for any help.
PS. Thanks again.
I'm talking about the ADF feeder section. Not the paper cassette section.
ADF Lower (1)
ADF LOWER.JPG
3-hb1-2276-000 shaft, separation roller
4-hs5-0070-000 gear, 18t
5-hb1-2285-040 gear, 18t
6-hb1-2288-000 spring, clutch
7-hb1-2273-000 roller, separation, lower
8-hb1-2274-000 roller, loading, lower
9-hb1-2286-000 cam, stop
10-hb1-2287-000 stop, document
14-hs5-0195-000 gear, 30t
16-hb1-2282-000 gear, 19t
17-hb1-2283-000 cam
18-hb1-2284-040 spring, clutch
22-hb1-2502-000 shaft, stop
ADF LOWER (2)
ADF LOWER 2.JPG
8-HB1-2272-040 ROLLER, DOCUMENT EJECT
10-HB1-2271-040 ROLLER, DOCUMENT FEED
11-HB1-2292-000 SHAFT, TRANSMISSION
27-HS5-0198-000 GEAR, 15T
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
That was great Teckat. Just what I needed.
Thank buddy.
Originally Posted by MR Bill
Thumbs up.jpg
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Thx Teckat. Can you post the upper ADf parts too?
ADF-UPPER.jpgADF, UPPER/ LC 9000
CLICK ON PIC TO VIEW BETTER
laser class 9000 series
figure no.-----Part number---qty--------description
1------------hb1-2300-000 n-1------frame, adf, upper
2------------hb1-2304-000---1-----stay, pressure (n)
3------------hb1-0638-000---1-----arm, detection (ds)
4------------wg8-5328-000---2-----photo int., oj-695201-701
5------------hh2-2629-000---1-----wire, grounding
6------------hb1-2303-000---1-----spring, leaf, grounding
7------------hb1-2302-050---1-----holder (des)
8------------hb1-2310-000---1-----arm, detection (des)
9------------hh2-2638-000---1-----cable with connector, 3p
10----------ha1-6852-000----1-----roller, eject, upper
11----------hb1-0641-000----1-----shaft, delivery roller
12----------hf5-0220-000-----1-----scanning strip unit (white)
13----------hb1-2301-000----1-----shaft, pressure
14----------hb1-2311-000----2-----sheet, function
15----------hs5-2103-000----1-----spring
16----------hb1-0632-000----1----arm, pressure
17----------hg5-0918-000----1----separation roller ass'y
18----------hb1-2305-000----1----brush, static discharge
19----------hh2-2639-000----1----cable with connector, 3p
20----------xb1-2300-407----6----screw, bh3x4 (s) 21----------xa9-0476-000----2----screw, tp m3x8
This is #17 parts=SEPARATION ROLLER ASS'Y from above picture
figure no.-----Part number---qty--------description
1---HB1-2326-000—1--SPRING, LEAF, GROUNDING
2---HS5-1052-000—4--BUSHING
3---HB1-2312-000—1--ROLLER, SEPARATION, UPPER
4---HS5-0199-000—1--GEAR, 27T
5---HF5-0219-000—1--HOLDER, TORQUE LIMITER
6---HB1-2313-000—1--TORQUE LIMITER
7---HS5-0077-000—1--GEAR, 25T
8---HS5-0196-000—1--GEAR, 29T/44T
9---HS5-9002-000—1--SCREW, M3X4
10--HB1-2327-000—1--ROLLER, FEED UPPER
11--HS5-0076-000—1--GEAR, 15T
12--HS5-2104-000—1--SPRING
13--HB1-2317-000—1--HOLDER, SEPARATION ROLLER
14--HB1-2328-000—N--SHAFT, PIVOT
15--HS5-9001-000—1--SCREW, M4X6
16--HS5-2031-000—1--SPRING
17--HB1-2316-000—1--HOLDER, FEED ROLLER
18--HB1-2319-000—2--SPRING, LEAF
19--HS5-0197-000—1--GEAR, 37T
20--HB1-2318-000—1--FRAME, SEPARATION ROLLER ASS'Y
21--XB1-2300-407—4--SCREW, BH3X4 (S) 22---XD2-1100-242--4--WASHER, RETAININGSEPARATION ROLLER ASS'Y.jpgclick on pic better view
Last edited by teckat; 10-18-2011 at 10:12 PM.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Great info. Thank you very much.
Hi guys
Ii cant seem to find a place that carries this part ... if anyone has a source for LC 9000 - Roller Separation Upper HB1-2312-000
===========================
GOOGLE it'
no luck/ time for a new product
This is a product from 1997
check your calender , believe it's 2015
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Reply With Quote
Bookmarks