I have a customer with IR8500, and the progress bar goes to the end, a nothing happens. i know that the problem is in the main controller, somebody know how to fixed it, thanks
I have a customer with IR8500, and the progress bar goes to the end, a nothing happens. i know that the problem is in the main controller, somebody know how to fixed it, thanks
I did that, I change all, boot. dimm, cables, etc, exactly the problem is the controller, I hear that on chip in the target cause false contact, but which one, this is my question. Maybe someone had had this problem, thanks
u are going to try and repair the Main Controller ????
trying to trace down a poor solder chip connection without diagnostic tools on a Main pcb. is not worth time and effort
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
yes, i will fix the controller, but it to hard, thanks, i tell you if i can do that, later
Bookmarks