Thanks:
0
Likes:
0
Dislikes:
0
-
Service Manager
100+ Posts
- Rep Power
- 0
how to use sst 4.22e connect with the irc3220
could you tell me the procedure on how to connect sst to the IRC 3220. As I no longer use this software. Thanks
-
Senior Tech
100+ Posts
- Rep Power
- 0
Working from memory and assuming this is an upgrade, the IRC has an ethernet port and MFD boots.
Install SST.
Register system software into SST.
Connect laptop to IR3320 via ethernet. (X-over cable)
Set laptop ip address to 172.16.1.120.
Boot MFD whilst holding down the 1 and 7 keys until FIXIP is shown in top left of screen.
Enter Service mode of MFD (*28*)
Select>Copier>Funtion>Download The screen will display 'HOLD' next to the download key on the (touchscreen)
In SST select download software, select IR3320 ALL frm the list on the right hand screen, click download and follow the on screen prompts.
-
Service Manager
100+ Posts
- Rep Power
- 0
Thanks for your great help !
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks