CCD issue

[adhy]

hi what the solution for the copies problem the left side A3 paper size of direction copy was solid black about 10 cm.
i had clean the mirror, primary charge, transfer,laser unit and at last i swap the CCD unit
the machine IR 6020 copieng normally. this problem occurs for LGL and A3 paper zise.
my question, is there a trick to repair or setting The CCD to solved this issue?

[adhy]

hi CanonTech i hope this is visible.

[mr.daus]

saya pernah mencoba memperbaiki CCD tapi CCD yg keluar kode 00225
saya coba mengganti elco sementara ada yg berhasil,,
yg belum berhasil saya coba lagi mengganti IC 12TZ51 kanibal dan hasilnya lumayan
(tapi saya tidak memiliki ilmu dasar elektro,, semua itu cuma saran dari beberapa rekan saya)

[adhy]

just making a copies, i try to print was good.

[adhy]

punya IC 12TZ51 ga?
atau persamaanx aja?

[zoraldinho]

Do you have the same problem when you using ADF and copyboard glass?

1. CCD Auto Adjustment
COPIER>FUNCTION>CCD>
CCD-ADJ
2. CCD Adjustment Data
all items under
COPIER>ADJUST>CCD

Use service manual.

[adhy]

Do you have the same problem when you using ADF and copyboard glass?

1. CCD Auto Adjustment
COPIER>FUNCTION>CCD>
CCD-ADJ
2. CCD Adjustment Data
all items under
COPIER>ADJUST>CCD

Use service manual.

no sir, if use The ADF copies are good, i had adjustment The CCD in service mode but nothing change. please help me.

[adhy]

alright sir i will try it tomorrow.