This thread is for connecting with an imagepass. Canon c3200 and x3e-01 not able to connect to network
This is for internal print. Canon IRC3200 not printing after removing ImagePass
This thread is for connecting with an imagepass. Canon c3200 and x3e-01 not able to connect to network
This is for internal print. Canon IRC3200 not printing after removing ImagePass
Accidents don't just happen. They must be carelessly planned.
it has the imagepass in the back but with w 7 64x don't work but before I put it on the guy who sold it said it could print without the box but still could not should I take off the imagepass
if you remove the imagepass you will have to install the multi-pdl kit for this model which requires swapping out boards, boot rom and reloading firmware which will require a technician.
Accidents don't just happen. They must be carelessly planned.
older 32's needed nboot rom to print all came with nics and the ablitity to pull scan out of box goto service mode copier display version and look for ps or pcl or ps/pcl values should be 1 if zero u cant print if u have a fiery check in service mode copier option int-mg set 3
fiery drivers wont print to non fiery copier and none fiery drivers wont print to fiery
sorry did not see all of your thread
if the copier had a fiery connected to it and you have removed it will not print reconnect fiery
again 2 different boot roms nboot you can print stand alone cboot you can print with fiery attached only
Bookmarks