Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Senior Tech 100+ Posts adhy's Avatar
    Join Date
    Feb 2011
    Posts
    109
    Rep Power
    28

    NP 6551 Error 002

    Hi there i facing NP 6551 displaying E002, the Thermistor has replaced but error stil occurs. i hope some body give me solution.

  2. #2
    Field Supervisor 500+ Posts smiley's Avatar
    Join Date
    Aug 2008
    Location
    manila
    Posts
    601
    Rep Power
    38

    Re: NP 6551 Error 002

    do you resset the error on service mode?
    there is no glory without sacrifice

  3. #3
    Senior Tech 100+ Posts adhy's Avatar
    Join Date
    Feb 2011
    Posts
    109
    Rep Power
    28

    Re: NP 6551 Error 002

    yes i had reset the error in service mode but no luck. i don't know what makes this happen. please any solution will apreciate thanks.

  4. #4
    Senior Tech 100+ Posts adhy's Avatar
    Join Date
    Feb 2011
    Posts
    109
    Rep Power
    28

    Re: NP 6551 Error 002

    No sir, the fix roller is smoothly and clean. i forgot mention that The error occurs each 2 or 3 days after reset the error in service mode.

  5. #5
    Trusted Tech 50+ Posts mr.daus's Avatar
    Join Date
    Apr 2011
    Location
    Tanjung Redeb - Berau
    Posts
    98
    Rep Power
    0

    Re: NP 6551 Error 002

    installation may be less precise thermistor,
    so that the thermistor can move freely during web spinning gear,
    should give more freely when installing cables,

  6. #6
    Senior Tech 100+ Posts adhy's Avatar
    Join Date
    Feb 2011
    Posts
    109
    Rep Power
    28

    Re: NP 6551 Error 002

    i will try to check the cable and power supply tomorrow thank you very much for your help sir.

  7. #7
    Senior Tech 100+ Posts adhy's Avatar
    Join Date
    Feb 2011
    Posts
    109
    Rep Power
    28

    Re: NP 6551 Error 002

    i've been running this machine about 2 weeks and the error not occurs again, in fact the problem is SSR pcb with soldering was loosen i resoldering the pcb and it is work properly.

  8. #8
    Service Manager 250+ Posts gensys's Avatar
    Join Date
    Jan 2011
    Location
    Yerevan, AM
    Posts
    324
    Rep Power
    30

    Re: NP 6551 Error 002

    Quote Originally Posted by adhy View Post
    Hi there i facing NP 6551 displaying E002, the Thermistor has replaced but error stil occurs. i hope some body give me solution.
    Just breaking the contacts on the the DC control may help- that is a good fix for older copiers. How may copies are on the copier? Have you had the copier moved resently? Or have you had some eletric work doe and is the copier on the same power circut with another device (AC unit) ? Also, can the code be reset in service mode, with no new parts put in? I have had the same problem on this mode and other models.... Replaced something with wires on it... Was it the thirmister? This model has two of them one towards the back of the UFR and one in the middle.. You also, may have a bad front door switch ( AC)....
    Asks a few questions.....
    The Road will be Mastered by >>> the Going...

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here