hallo guys, please help, my copier got an error code E808 - 002
the error appear after copying 50sheets
(don't have the service manual yet)
Thanks in advance
hallo guys, please help, my copier got an error code E808 - 002
the error appear after copying 50sheets
(don't have the service manual yet)
Thanks in advance
E808 there is a IH power supply input error
E808 IH power supply input error
0001 =The IH power supply input voltages are higher than the stipulated voltages
0002 =The IH power supply input voltages are lower than the stipulated voltages -
Check your wall voltages- neutral to ground/neutral to hot/ground to hot- Connect with the outlet of a correct voltage.
- Check the connection of the connector.
- Replace the fixing heater power supply.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
ELVIS.jpg
good find, thanks
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
i have a mf229dw canon printer. when i want to get copy by copier, after copying the copier show the E808-0002 and i have to restart it.please help me to pass this errore.my gmail is ran.shahram@gmail.com. thank you for helping...
----------------------------------------------------------------------------
Canon MF229
Code
E808-0002 Description Fixing Assembly_Edge Right Cooling Fan error Remedy
When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies.
(1) Replace the Edge Right Cooling Fan.
or check
(2) Replace the DC Controller Board.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks