Thanks: 0
Likes: 0
Dislikes: 0
I have a basic ir 1024 mc that is jamming 3 or 4 times a day with 0208 codes i have tried a new fuser unit complete i have checked sensors on paper feed path it has new feed and sep rollers and modified springs in the cassette still jamming its a new mc only 4k on clock only been installed for a month any ideas
3-4 times a day?One word. PAPER
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
0208 occurs as the copy lead edge stops between the registration roller and the fixing assembly. The 0208 jam is listed as a stationary jam at the registration roller.Originally Posted by tekkie
Replace or Inspect the SL2 solenoid/on Paper Pick-Up Assembly
Check the locking force of the Left Door Assembly/continuous copying/printing could have deformed the Left Cover Open/Close Lever
installation position of the Compression Spring for lever is changed, and the number of Compression Springs has increased from 1 to 2
the length of the Compression Spring, the shape of the Left Cover Open Close Lever and the
Rear Fixing Guide have been changed.
CLICK ON PICS for better View
New-Left door Assembly FM2-9044-010
LDA.JPG
New-Compression Spring (2) FU8-2277-000
New-Left Cover Open/Close Lever FC7-2952-010
New Rear Fixing Guide FC6-7455-010
0208.JPG0208_.JPG
0208_3.JPG
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
I had the same problem and I resolved it by replacing the SW2.
Reply With Quote
Bookmarks