imageRUNNER Advance C2020 / C2030
Measure to prevent "E020-0xB1" and
"E020-0x60" that occur due to the toner level-detection error:
There is a case where a large amount of toner electrostatically adheres to the toner level detection sensor at the toner buffer, consequently detecting the presence of toner erroneously. If the device is used continuously in this situation, toner is not supplied to
the P-unit developing assembly and then the T/D ratio decreases, consequently causing an "E020-0xB1" or
"E020-0x60."
Therefore, new service mode items have been added so that the toner can be supplied to the toner buffer after the sensor face is cleaned.
Service Mode (Lv1):
>COPIER >FUNCTION >INSTALL >SPLY-H-Y
>COPIER >FUNCTION >INSTALL >SPLY-H-M
>COPIER >FUNCTION >INSTALL >SPLY-H-C
>COPIER >FUNCTION >INSTALL >SPLY-H-K
*In order to use these service mode items, the combination with MN-CONT v20.xx
(next version) or later is required.
Bookmarks