Blank paper in blank paper out.

[bolabali]

Dear all,
I have spent two working days to fix iR3300 and I am gave up. The problem is no result copied (blank paper in blank paper out) after replacing new drum and blade. Anybody ever experience samething and willing to share solution? Great thank if any..

[mr.daus]

Dear all,I have spent two working days to fix iR3300 and I am gave up. The problem is no result copied (blank paper in blank paper out) after replacing new drum and blade. Anybody ever experience samething and willing to share solution? Great thank if any..

coba chek transfer roller connection, mungkin terjadi sesusatu yang membuat transfer tidak memiliki tegangan,,atau chek laser exposure nya kemungkinan ada kotoran saat anda blowerchek kembali koneksi primary roller nyajika anda butuh buku manualnya akan saya kirimkan

[gensys]

coba chek transfer roller connection, mungkin terjadi sesusatu yang membuat transfer tidak memiliki tegangan,,atau chek laser exposure nya kemungkinan ada kotoran saat anda blowerchek kembali koneksi primary roller nyajika anda butuh buku manualnya akan saya kirimkan

send your post >>>>privat
This site in <<.com>> domain

[gensys]

coba chek transfer roller connection, mungkin terjadi sesusatu yang membuat transfer tidak memiliki tegangan,,atau chek laser exposure nya kemungkinan ada kotoran saat anda blowerchek kembali koneksi primary roller nyajika anda butuh buku manualnya akan saya kirimkan

Both next time write distinctly and clearly

[zoraldinho]

Replace drum and blade and give up??

[bolabali]

Both next time write distinctly and clearly

Please excuse my English.

.....

[bolabali]

Replace drum and blade and give up??

Frustrated actually...

[blackcat4866]

How do internal prints look? Possibly bad laser? =^..^=

[Exok]

Open the front door while making a copy so that the latent image is still on the photoconductor. Pull out the drum and see if there is an image on it. If there is, the problem is with transfer. If not, I would suspect the laser unit or developer unit. Make sure nothing is blocking the laser path. Make sure your developer mag roller has toner on it and is turning. Wipe a clean spot on the mag roller, make a copy, if the clean spot is still there your developer unit is not turning to supply toner to the drum.

[bolabali]

Open the front door while making a copy so that the latent image is still on the photoconductor. Pull out the drum and see if there is an image on it. If there is, the problem is with transfer. If not, I would suspect the laser unit or developer unit. Make sure nothing is blocking the laser path. Make sure your developer mag roller has toner on it and is turning. Wipe a clean spot on the mag roller, make a copy, if the clean spot is still there your developer unit is not turning to supply toner to the drum.

There is no image on the drum but a thick line of dumped toner when I pull out rhe drum. Seems to me the drum is not turning.