Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: ir 550

  1. #1
    Field Supervisor 500+ Posts
    Join Date
    Jun 2007
    Posts
    624
    Rep Power
    41

    ir 550

    Having problem with 3 and 4 feed units. All new tires in both and it will feed 1 sheet but that's it. Checked the pf connectors for bent pins ok drive pack at the rear. Swapped trays same deal. Can't get either to multifeed only one sheet then jams. Feed systems are trying to feed the next sheet but doesn't come out of the tray. Help appreciated. Thanks t

  2. #2
    Trusted Tech 50+ Posts mr.daus's Avatar
    Join Date
    Apr 2011
    Location
    Tanjung Redeb - Berau
    Posts
    98
    Rep Power
    0

    Re: ir 550

    Quote Originally Posted by T911 View Post
    Having problem with 3 and 4 feed units. All new tires in both and it will feed 1 sheet but that's it. Checked the pf connectors for bent pins ok drive pack at the rear. Swapped trays same deal. Can't get either to multifeed only one sheet then jams. Feed systems are trying to feed the next sheet but doesn't come out of the tray. Help appreciated. Thanks t

    whether the separation roll has been replaced?
    if it has been replaced and then set the position of firmness to the rubber puller,,
    also check the possibility of any paper that has not been taken during the previous hookon the back of the paper which could interfere with rotation gear
    firdaus +(62)8195002007 firdaustrish@ymail.com

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here