Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 3 of 3 FirstFirst 123
Results 21 to 23 of 23
  1. #21
    Technician
    Join Date
    Mar 2011
    Posts
    40
    Rep Power
    27

    Re: registry mistake color. canon 3080

    sorry for send cut off images i send a PG6 GRID TEST. i change two ITB, and make the same fault 4220_001.pdf4220_001.pdf

    the paper is A4 normal

  2. #22
    Service Manager 10,000+ Posts
    registry mistake color. canon 3080

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: registry mistake color. canon 3080

    Quote Originally Posted by asser145 View Post
    sorry for send cut off images i send a PG6 GRID TEST. i change two ITB, and make the same fault 4220_001.pdf4220_001.pdf

    the paper is A4 normal
    What firmware ver. is in your printer ???

    THIS IS A MAIN SCAN ISSUE(CROSS-FEED>front to rear)
    see a up close copy of your PG6
    posters>double click on pic for better view
    pg6.JPG

    Auto-registration detection control refers to the previous control values and decides the next setting values. If the previous control values are off the range due to some errors (e.g. PCRG is not set correctly), the next control values are affected and the auto-registration detection correction cannot be performed appropriately.

    DID U DO THIS PROCEDURE IN LEVEL 2 OF SERVICE MODE
    your DCON ver.must be at least 21.04 to access this mode below
    Service Mode: Level 2 > Copier > Function > Clear > Reg/Clear. Highlight Reg/Clear and press OK.
    After performing the clear, reboot the machine and 1.perform a Gradation Quick Adjust
    2.-and then a Full Gradation adjust.


    IF that fails>>>>>
    Before U perform a DC-CON clear, Print out your P-PRINT SETTINGS >power of/on and RE in-putt all DC-CON values after clear.
    then POWER of/on
    Last edited by teckat; 08-19-2011 at 04:22 PM.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #23
    Field Supervisor 500+ Posts
    registry mistake color. canon 3080


    Join Date
    Jun 2009
    Location
    oxford
    Posts
    690
    Rep Power
    37

    Re: registry mistake color. canon 3080

    Hi

    Did you manage to resolve this issue??

    I have similar problem!

    Thanks

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here