registry mistake color. canon 3080

[asser145]

I have a canon 3080 that does not get the color registration, color and moved out

There are some adjustments? might be wrong?

tanksregistr.jpg

[zoraldinho]

settings>adjustment>auto adjustment>full calibration

[its_just_a_copier]

Looks like a color registration problem to me! Go to service mode and run a test, PG TYPE 6. If you can see multiple colored lines and not black lines then that is your problem and follow these steps.

First Clean the two patch sensors on the frame of the Processing Unit (directly to the right of the black drum).
After that run Auto Color Mismatch Correction (located in Adjustment/Cleaning).

If this doesnt help you can try in level 2 Service Mode COPIER>FUNCTION>CLEAR>REG-CLR.

If all else fails replace your Image Transfer Belt FM2-5522-030 & Cleaning Unit FM2-5523-000.

Good Luck!

[teckat]

I have a canon 3080 that does not get the color registration, color and moved out

There are some adjustments? might be wrong?

tanksregistr.jpg

Looks like black drop off ???
Identify the color of the cross-feed light area and then check the Developer Clutch for that color. Swap that developer clutch with another color to see if the light area changes to the other color.

[asser145]

I have twice the registry setting and does the samereg2.jpg

[mrfixit51]

The last picture tells the tale well, it looks like the same issue experienced on 3200 series machines for ages. I would replace the ITB assembly and clean blade assembly, and start from there.

[zoraldinho]

In service mode check DRBL-1 for ITB

[charm5496]

The last picture tells the tale well, it looks like the same issue experienced on 3200 series machines for ages. I would replace the ITB assembly and clean blade assembly, and start from there.

To expand on this and I agree with what mrfixit51 says. The ITB unit is only good for 300K letter size impressions and the cleaner blade assembly is only good for 100K letter size impressions. If the ITB is stretched and slipping or the blade is dry and causing too much drag on the belt you will get misregistration like you are fighting here.

[WOETC]

mrfixit51 speaks true. ITB Belt and cleaner. I've seen this a bunch of time now. always the same result. mefixit51 - google images for Phillip Adams in Australia. Every time I see your Avatar I think it's him. It gives you a lot of cred though.

[mrfixit51]

mrfixit51 - google images for Phillip Adams in Australia. Every time I see your Avatar I think it's him. It gives you a lot of cred though.

I do see the similarity,, but my avatar is not my own visage, but George Carlin's.