Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Junior Member
    Join Date
    Aug 2011
    Posts
    3
    Rep Power
    0

    irc 3080i E003-01

    To all you aces out there, I Have a irc 3080i with an intermittent E003-01 code. Replaced the fixing assembly,sw3,DC controller,main power supply RD upper and lower cap mod. to no avail. any ideas would be thoroughly appreciated!!!! Thanks.


  2. #2
    Senior Tech 100+ Posts its_just_a_copier's Avatar
    Join Date
    May 2011
    Location
    NY
    Posts
    133
    Rep Power
    0

    Re: irc 3080i E003-01

    How about the DC Driver PCB?
    That's the one that takes signals from the thermistors...

    also, I gotta ask: Customer Power?


  3. #3
    Junior Member
    Join Date
    Aug 2011
    Posts
    3
    Rep Power
    0

    Re: irc 3080i E003-01

    Customers power checked out ok. I'll give the DC driver a try.


  4. #4
    Service Manager 10,000+ Posts
    irc 3080i   E003-01

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,149
    Rep Power
    213

    Re: irc 3080i E003-01

    Quote Originally Posted by flyinblind View Post
    To all you aces out there, I Have a irc 3080i with an intermittent E003-01 code. Replaced the fixing assembly,sw3,DC controller,main power supply RD upper and lower cap mod. to no avail. any ideas would be thoroughly appreciated!!!! Thanks.

    CHECK THIS

    SW3 is the Fixing unit's AC interlock switch. Sometimes the right door actuator will be bent and not fully press SW3 when the right door is closed. SW3 is a button switch located right above some of the Fixing unit's rear frame connections. SW3 has been found to show signs of wear and have carbon build up inside it. If the right door actuator is straight and making good contact , inspect SW3 and it's AC connections. If any flaws are found after inspecting SW3, replace it. SW3's part number is, FM2-9427-000

    kb1017.jpg

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  5. #5
    Lead Service Technician 1,000+ Posts mrfixit51's Avatar
    Join Date
    Oct 2008
    Location
    Davenport, Iowa
    Posts
    1,979
    Rep Power
    40

    Re: irc 3080i E003-01

    Also an oddity I ran into last week could be a contributing factor. The upper bracket that is part of the right door hinge, the part near this actuator, was broken, and the door did not hang correctly. The steel had fractured, probably by the customer over extending the door when opening it. It had been jamming a lot. It was the kind of break you see from metal fatigue when something is flexed over and over till it breaks...

    It is item #24

    Attached Files Attached Files
    "Once a King, always a King, but once a Knight is enough!"

  6. #6
    Junior Member
    Join Date
    Aug 2011
    Posts
    3
    Rep Power
    0

    Re: irc 3080i E003-01

    Turned out to be a faulty rebuilt fixing assembly. One of the those curve balls, thrown my way!!!


  7. #7
    Service Manager 10,000+ Posts
    irc 3080i   E003-01

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,149
    Rep Power
    213

    Re: irc 3080i E003-01

    Quote Originally Posted by flyinblind View Post
    Turned out to be a faulty rebuilt fixing assembly. One of the those curve balls, thrown my way!!!

    repair_testequipment.gifget the money back

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here