Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Senior Tech 250+ Posts MFPTech's Avatar
    Join Date
    Nov 2010
    Location
    Surrey
    Posts
    482
    Rep Power
    20

    iRC3220 - ImagePass C1 - Disk Full

    iRC3220 - ImagePass C1 - Disk Full message

    Anyone has experienced this issue please and what was the remedy.



    Thanks in advance!


  2. #2
    Field Supervisor 500+ Posts vigour's Avatar
    Join Date
    Aug 2010
    Posts
    980
    Rep Power
    25

    Re: iRC3220 - ImagePass C1 - Disk Full

    most likely you will need a new hard drive eventually
    if you are lucky you can get by with going into setup and erasing everything by doing factory default or some name like that, after printing your config page


  3. #3
    Lead Service Technician 1,000+ Posts mrfixit51's Avatar
    Join Date
    Oct 2008
    Location
    Davenport, Iowa
    Posts
    1,979
    Rep Power
    40

    Re: iRC3220 - ImagePass C1 - Disk Full

    Is there a way to erase the print data area on the drive? The system area should not experience "bloat", but the print data area could be hosting lots of orphaned files...

    "Once a King, always a King, but once a Knight is enough!"

  4. #4
    Senior Tech 100+ Posts ReproKev's Avatar
    Join Date
    Feb 2009
    Location
    Newark, DE
    Posts
    161
    Rep Power
    21

    Re: iRC3220 - ImagePass C1 - Disk Full

    On most fiery's you can go into setup and select "clear server". This will erase all print jobs on the hard drive and not touch the system software. I believe the C1 has this option also.


  5. #5
    teacher-guide-expert-guru 2,500+ Posts
    iRC3220 - ImagePass C1 - Disk Full

    zoraldinho's Avatar
    Join Date
    Mar 2008
    Location
    SVN
    Posts
    4,073
    Rep Power
    75

    Re: iRC3220 - ImagePass C1 - Disk Full

    You can clear the server by using the Server>Clear Server command in Command
    WorkStation or the Server>Clear Server command in Command WorkStation LE. In
    Command WorkStation, you can delete the following jobs individually: held jobs,
    active jobs, printed jobs, archived jobs, FreeForm masters, and scan jobs.

    Although the capacity of the HDD is changed, the system software and the installation method for it are not changed.

    OLD HDD, 10GB WM2-5185-000

    NEW HDD, 20GB WM2-5199-000

    Practice makes perfect
    If it ain't broke, don't fix it
    There's no such thing as a free lunch
    A picture is worth a thousand words
    If you want something done right, you have to do it yourself


  6. #6
    Service Manager 1,000+ Posts
    iRC3220 - ImagePass C1 - Disk Full

    charm5496's Avatar
    Join Date
    Apr 2008
    Posts
    2,344
    Rep Power
    48

    Re: iRC3220 - ImagePass C1 - Disk Full

    Quote Originally Posted by ReproKev View Post
    On most fiery's you can go into setup and select "clear server". This will erase all print jobs on the hard drive and not touch the system software. I believe the C1 has this option also.
    This should free up the needed space on the HDD. Load CWS if you do not have it loaded already and you can easily clear the server of all the data that has built up over time.

    Accidents don't just happen. They must be carelessly planned.

  7. #7
    Field Supervisor 500+ Posts vigour's Avatar
    Join Date
    Aug 2010
    Posts
    980
    Rep Power
    25

    Re: iRC3220 - ImagePass C1 - Disk Full

    cLEAR sERVER

    that is what i meant when i said factory default. sorrry could not remember the correct terminology


  8. #8
    Senior Tech 250+ Posts MFPTech's Avatar
    Join Date
    Nov 2010
    Location
    Surrey
    Posts
    482
    Rep Power
    20

    Re: iRC3220 - ImagePass C1 - Disk Full

    I was able to get the first screen and Cleared the server but then image Pass went to
    "Printer Performing config Mode Settings" and Processing Data is flashing but nothing happens.

    Could not log in with command workstation to remove stored files


  9. #9
    Lead Service Technician 1,000+ Posts mrfixit51's Avatar
    Join Date
    Oct 2008
    Location
    Davenport, Iowa
    Posts
    1,979
    Rep Power
    40

    Re: iRC3220 - ImagePass C1 - Disk Full

    Quote Originally Posted by MFPTech View Post
    I was able to get the first screen and Cleared the server but then image Pass went to
    "Printer Performing config Mode Settings" and Processing Data is flashing but nothing happens.

    Could not log in with command workstation to remove stored files
    Sounds like it is time for a clean install then. Hopefully you already have a configuration sheet print out from before this issue sprang up!

    "Once a King, always a King, but once a Knight is enough!"

  10. #10
    Service Manager 1,000+ Posts
    iRC3220 - ImagePass C1 - Disk Full

    charm5496's Avatar
    Join Date
    Apr 2008
    Posts
    2,344
    Rep Power
    48

    Re: iRC3220 - ImagePass C1 - Disk Full

    If you plan keeping this unit for a while longer it would be worth your while to get a new 20GB HDD so you don't have to worry about another failure

    Accidents don't just happen. They must be carelessly planned.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here