COUNTER IR7105

[Dimacop]

i can use the COUNTER/PCB OF 7105
IN IR907O?

[charm5496]

i can use the COUNTER/PCB OF 7105
IN IR907O?

No this will not work!!!!!!

[teckat]

i can use the COUNTER/PCB OF 7105
IN IR907O?

NO
READ THIS PDF>>>>iR B&W Counters_TP05 108d.pdf

It is illegal to tamper with this circuit in an attempt to falsify the counter readings of any Canon
Copier.

Counter Memory, Serial Number and Main Controller PCBs work as a set and are considered the “Soft Counter Circuit”. The Counter Memory PCB is electronically stamped with the serial number from the Serial Number PCB. Neither the Counter Memory PCB nor the Serial Number PCB can be swapped to other equipment. The Counter Memory PCB keeps track of the total count, which cannot be erased or changed. The service counters are retained by the Main Controller. These counters can be reset manually through service mode. When the Counter Memory PCB must be replaced, after installing the new one, the new Counter Memory PCB learns the Total Count from the Main Controller. This is retained in SRAM on the Main Controller PCB and held active by means of an on board battery.