Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Dec 2009
    Location
    kuala lumpur
    Posts
    119
    Rep Power
    18

    finisher model AD1 skew

    hi geeting to all


    ir5075 using finisher AD1 when doin sort and staple .paper came out skew.

    pls advice me

    thanks


  2. #2
    Senior Tech 100+ Posts
    Join Date
    Dec 2009
    Location
    kuala lumpur
    Posts
    119
    Rep Power
    18

    Re: finisher model AD1 skew

    hi

    skew from finisher when using sort and staple.

    thanks.any solution?


  3. #3
    Service Manager 1,000+ Posts
    finisher model AD1 skew

    charm5496's Avatar
    Join Date
    Apr 2008
    Posts
    2,353
    Rep Power
    48

    Re: finisher model AD1 skew

    This issue can occur if there is no drive to the Upper Delivery Rollers. Turn off the imageRUNNER and turn on Bits 1, 2, and 7 of SW104 on the Finisher Controller. Turn on the imageRUNNER and then press SW103 on the Finisher Controller. The Swing Guide should then open and the Upper Delivery Rollers should be turning. If the Upper Delivery Rollers are not turning, check the Swing Motor M106 and also check the drive components between the Swing Motor M106 and the Upper Delivery Rollers.

    KBase 025.jpg

    Accidents don't just happen. They must be carelessly planned.

  4. #4
    Senior Tech 100+ Posts
    Join Date
    Dec 2009
    Location
    kuala lumpur
    Posts
    119
    Rep Power
    18

    Re: finisher model AD1 skew

    hi

    should need upgrade firmware? pls anyone give me some technical bulliten.

    thanks


  5. #5
    Service Manager 10,000+ Posts
    finisher model AD1 skew

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,206
    Rep Power
    215

    Re: finisher model AD1 skew

    Quote Originally Posted by eurokris View Post
    hi

    should need upgrade firmware? pls anyone give me some technical bulliten.

    thanks
    READ THESE PDF's
    AD1_TP07-1.pdf
    AD1_TP07-3.pdf
    AD1_TP08-2.pdf----this one has good info
    AD1_TP09-1.pdf


    Latest firmware for Finisher is – AD1/AD2 Fin-AD_STACKER_v0701.exe
    this was in Firmware v52.01a and later ver.'s I believe
    Upgrade the Finisher with the proper version using the PCB Downloader Tool

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  6. #6
    Senior Tech 100+ Posts
    Join Date
    Dec 2009
    Location
    kuala lumpur
    Posts
    119
    Rep Power
    18

    Re: finisher model AD1 skew

    hi

    pls anyone can email to me the firmware for finisher ad1 v 7.01.

    citikris_1010@hotmail.com

    thanks


  7. #7
    Service Manager 10,000+ Posts
    finisher model AD1 skew

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,206
    Rep Power
    215

    Re: finisher model AD1 skew

    u need the pcb PCB Downloader Tool (FY9-2034)
    + SST + printer firmware v52.01a or Later
    for this operation
    - click on picture
    tool.JPG

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  8. #8
    Senior Tech 100+ Posts
    Join Date
    Dec 2009
    Location
    kuala lumpur
    Posts
    119
    Rep Power
    18

    Re: finisher model AD1 skew

    hi

    i have the downloader but dont have firmware.anyone email to me citikris_1010@hotmail.com

    thanks


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here