Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Sep 2011
    Posts
    82
    Rep Power
    0

    IR2016 E808 Error code

    Please advise what error code E808 means and how to fix. Thanks

  2. #2
    Service Manager 10,000+ Posts
    IR2016 E808 Error code

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: IR2016 E808 Error code

    Quote Originally Posted by LennoxD View Post
    Please advise what error code E808 means and how to fix. Thanks

    Error :
    Intermittently, an E808 error code is displayed on the control panel.

    Workaround :
    In this case, installing a DC Controller with version 3.02 corrected the error

    or see below








    imageRUNNER 2016 / 2020 / 2016i / 2020i


    Clear error code E808------


    The error has been caused by one of the connectors for the fixing assembly not being plugged in when the unit is powered on. This has happened after replacing the fixing assembly and not plugging in the connector or when trouble shooting on the machine for some other problem and leaving the connector unplugged. The connector is to the thermistors in the fixing assembly. In the general circuit diagram it is connector J255DH.
    The connector is a six pin connector with two yellow and two orange wires going into it. It is the top connector located above and to the right of the fixing assembly. It is behind a cover on the side of the machine.


    To clear the E808 code unplug the machine for about 10 minutes. If the thermistors are bad the code will appear but will not reset until the fixing film assembly is replaced. The part number for the fixing film assembly is FM2-3346-000.











    Last edited by teckat; 09-08-2011 at 12:30 AM.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Sep 2011
    Posts
    82
    Rep Power
    0

    Re: IR2016 E808 Error code

    Thanks vrey much.

  4. #4
    Service Manager 10,000+ Posts
    IR2016 E808 Error code

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: IR2016 E808 Error code

    Quote Originally Posted by LennoxD View Post
    Thanks vrey much.

    good luck
    here are the pics/ sometime they don't display properly

    click on pics for better view
    The error has been caused by one of the connectors for the fixing assembly not being plugged in when the unit is powered on. This has happened after replacing the fixing assembly and not plugging in the connector or when trouble shooting on the machine for some other problem and leaving the connector unplugged.
    The connector is to the thermistors in the fixing assembly. In the general circuit diagram it is connector J255DH.
    wire.jpg


    The connector is a six pin connector with two yellow and two orange wires going into it. It is the top connector located above and to the right of the fixing assembly. It is behind a cover on the side of the machine.
    thermistor.jpg
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  5. #5
    Trusted Tech 50+ Posts
    Join Date
    Sep 2011
    Posts
    82
    Rep Power
    0

    Re: IR2016 E808 Error code

    Got it thanks

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here