Imagerunner 2830

[Old Crow]

After being on for about 15 minutes the display flashes on and off, makes a slight beeping noise, powers up and down, etc. Is this a power supply issue? Have not worked on this model before, is this a common issue with these? Thanks.

[teckat]

After being on for about 15 minutes the display flashes on and off, makes a slight beeping noise, powers up and down, etc. Is this a power supply issue? Have not worked on this model before, is this a common issue with these? Thanks.

Try this first enter >on control panel__
select--Additional functions>System Settings>Network settings>TCP-IP>Multicast Discovery and set it to "off" (default is "on").


u need to remove memory>clean ends of memory>then re-seat it
or>>>>>>>>>>>
problem may be resolved by doing a MMI clear in service mode.

COPIER>FUNCTION>CLEAR>MMI
power of/on----------re-enter you user settings back in printer

*Clearing MMI will erase all User Defined values, excluding Fax.
Print out the following reports;

Print out a User's Data List for "Send", "Network", & "Printer" from Additional Functions.
Print out a "USER-PRT" from service mode COPIER>FUNCTION>MISC-P

[Old Crow]

Thanks Teckat. I will try what you suggested and let you know what happens.