Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Aug 2009
    Posts
    233
    Rep Power
    33

    drum unit replacement on Canon NP6016

    Hi,
    Client got this machine donated to them. I am Muratec/Konica-Minolta dealer primarily. The drum is worn out and they asked me to install it. Are there any counters to reset or simulations to run? If so, I would appreciate them.
    Thank you.

  2. #2
    Field Supervisor 500+ Posts
    drum unit replacement on Canon NP6016

    Simons's Avatar
    Join Date
    Jun 2008
    Location
    Midwest USA
    Posts
    493
    Rep Power
    0

    Re: drum unit replacement on Canon NP6016

    Yes there are two settings that need to be changed in Service mode . The primary and offset value. To match the drum value. Otherwise your new drum may give poor quality or not last as long as it should.

    I am in a world search for a NP 6016 Developer that has a good mag roller. check this to see if its worth going forward. PLus Ill give you a good price for your used developer if its in decent shape. Image looks like crap. PM me your email and ill send it.
    Attached Images Attached Images

  3. #3
    Service Manager 10,000+ Posts
    drum unit replacement on Canon NP6016

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: drum unit replacement on Canon NP6016

    I used to use BRASSO to clean those NP dev.rollers with some success/ perks up the CQ.
    Remove roller>wipe off with small amt. alcohol/wipe BRASSO straight across roller>polish good>clean off with a damp cloth> let dry>wipe clean again


    Formular has changed over the years
    Brasso - Wikipedia, the free encyclopedia
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  4. #4
    Service Manager 10,000+ Posts
    drum unit replacement on Canon NP6016

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: drum unit replacement on Canon NP6016

    Quote Originally Posted by krm View Post
    Hi,
    Client got this machine donated to them. I am Muratec/Konica-Minolta dealer primarily. The drum is worn out and they asked me to install it. Are there any counters to reset or simulations to run? If so, I would appreciate them.
    Thank you.

    check your PM (Private Message)
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  5. #5
    Field Supervisor 500+ Posts
    drum unit replacement on Canon NP6016

    Simons's Avatar
    Join Date
    Jun 2008
    Location
    Midwest USA
    Posts
    493
    Rep Power
    0

    Re: drum unit replacement on Canon NP6016

    This wont work in my case. Blade has messed up and is digging into the roller. Causing a large light area.
    Quote Originally Posted by teckat View Post
    I used to use BRASSO to clean those NP dev.rollers with some success/ perks up the CQ.
    Remove roller>wipe off with small amt. alcohol/wipe BRASSO straight across roller>polish good>clean off with a damp cloth> let dry>wipe clean again


    Formular has changed over the years
    Brasso - Wikipedia, the free encyclopedia

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here