Thanks:
0
Likes:
0
Dislikes:
0
-
Canon 1025 paper feed issue.
Went on a call today to replace the drum on a 1025. There was a note on tray two" do not useTray two will jam" . The paper is making it into the throat but not to the registration area of the main body. Open and close the left side door and the paper will then print the first page and jam on the second page of a multi-page job. Single page jobs will print after opening and closing the left side door. After looking at the parts and service manuals for the tray two I don't see any hint of where to look for whatever is causing this problem. The machine does just fine with the bypass and trat one.
-
Senior Tech
250+ Posts
- Rep Power
- 28
Re: Canon 1025 paper feed issue.
Have you tried to look at the paper feed clutch of the said tray? Also try to check the suncronisation of the release and lock of the magnetic clutch,and the feed rubbers as well.
-
Re: Canon 1025 paper feed issue.
what is the Jam Code FOR TRAY 2 ?
Intermittent J0208 & J0210 jams ??
install new updated left door assembly FM2-9044-010 or install updated left cover open / close lever (FC7-2952-010), updated rear fixing guide (FC6-7455-010) and 2 updated compression springs (FU8-2277-000)
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks