Thanks: 0
Likes: 0
Dislikes: 0
Chaps
I have an ADV5030i that continualy reboots. You can get an odd copy out or PG/P-PRINT but then it will reboot. You also can't print to it. The monitor will say "Processing..." then "Waiting to print...." this will hang at this all day.
I've swapped the MN1 and system software update and MMMCON cleared it. The other MN1 doesn't reboot as often but it still wont let you print.
Hope someone can help
Rick..
UK.
"Once a King, always a King, but once a Knight is enough!"
.message is the key!
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
I would try installing a new RAM stick in your MN-CON 1. We have seen this happen on the PS kits with the extra RAM several times
Accidents don't just happen. They must be carelessly planned.
Reseat boot rom and any ribbon cables for the main controller has been the solution for the 2270 series and the like. Or a bad main cont.
You might want to prep a Mn-cont 2 & HDD. HDD is just in case too many reboots had corrupted system
Reply With Quote
Bookmarks