Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Technician
    Join Date
    Sep 2011
    Location
    San Luis Potosí SLP
    Posts
    19
    Rep Power
    26

    corona wire burn too fast. ir6570

    corona wires are changed from 50000 to 120000 copies.
    had previously commented that performance up 400000-500000copies.
    the copy quality is poor in copying and printing.
    present in equipment failure 800000 and 4.8 million copies.
    this failure may be caused by excess lubricant containing the tonerkatun and manufactured in Canada???

  2. #2
    Service Manager 10,000+ Posts
    corona wire burn too fast. ir6570

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: corona wire burn too fast. ir6570

    do not use the old gold plated wire on Primary, pre-transfer, transfer, separation charging wires


    printer enviorment
    / proper air circulation
    Air filter 1
    Air filter 2
    Ozone filter

    u can't go by general replacement numbers on filters/or wires all area locations are different
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Technician
    Join Date
    Sep 2011
    Location
    San Luis Potosí SLP
    Posts
    19
    Rep Power
    26

    Re: corona wire burn too fast. ir6570

    FB4-3687-000 is the number of corona wire I use.
    let me tell you though the vast majority of end customers in Mexico will not authorize the change of filter.
    thanks for the suggestion.

  4. #4
    Service Manager 1,000+ Posts vigour's Avatar
    Join Date
    Aug 2010
    Posts
    1,034
    Rep Power
    42

    Re: corona wire burn too fast. ir6570

    clean the filters.
    if they are paying you for each call, you will be making more money because they refuse to pay for a necessary filter.
    show them the page in your manual, about filter replacement

  5. #5
    Field Supervisor 1,000+ Posts RRodgers's Avatar
    Join Date
    Jun 2009
    Location
    San Bernardino
    Posts
    1,951
    Rep Power
    56

    Re: corona wire burn too fast. ir6570

    Like everyone else say, clean the filters. Just had a 7033 (konica) that kept streaking due to clogged filters and the corona's would get dirty fast.
    Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

  6. #6
    Field Supervisor 500+ Posts
    corona wire burn too fast. ir6570

    Simons's Avatar
    Join Date
    Jun 2008
    Location
    Midwest USA
    Posts
    493
    Rep Power
    0

    Re: corona wire burn too fast. ir6570

    Quote Originally Posted by teckat View Post
    do not use the old gold plated wire on Primary, pre-transfer, transfer, separation charging wires


    printer enviorment
    / proper air circulation
    Air filter 1
    Air filter 2
    Ozone filter

    u can't go by general replacement numbers on filters/or wires all area locations are different
    I second that and then some. Cramped areas with poor air flow can increase maintenance to every 40k or abouts. Need to have wire cleaners working and installed.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here