Too mauch toner while printing

[Sahdy]

There is too much toer when printing only.
Canon IR 6000n
by the way it was also in coping but i solved it by reducing Copy Dens from 5 to 2 (Copier - Adjust - Dens).
but don't know how to reduce toner on the letter of the words on the printed paper it's too much now.
thanks.

[teckat]

There is too much toer when printing only.
Canon IR 6000n
by the way it was also in coping but i solved it by reducing Copy Dens from 5 to 2 (Copier - Adjust - Dens).
but don't know how to reduce toner on the letter of the words on the printed paper it's too much now.
thanks.

One word "CALIBRATION" when was the last time ????

do u have a Fiery imagePASS L1 connected/ if so run your calibration from it

Have u the latest print drivers ??

[Sahdy]

One word "CALIBRATION" when was the last time ????

do u have a Fiery imagePASS L1 connected/ if so run your calibration from it

Have u the latest print drivers ??

How do i know imagePASS L1 is connected or not?

Cloud you mention the latest print driver for me to download it.

thaks so much.

[teckat]

How do i know imagePASS L1 is connected or not?

Cloud you mention the latest print driver for me to download it.

thaks so much.

sorry, I just now see u have a iR6000n / that means u don't have a Fiery connected/ u have a Printer Kit Network Multi-PDL Printer Kit-A2 installed

are u a tech ??
if not have your IT Person check or install latest drivers-

here is the link for the latest drivers
Canon U.S.A. : Support & Drivers : imageRUNNER 6000

[COPIERTEC ASSOCIATES]

I had similar experience some time and did the following with good results:Go to COPIER>ADJUST>DEVELOP>BIAS.Increase setting of Bias from say 180>220 likewise adjust the values for HVT-DE to any value to + or- as you test on both copying and printing.

[teckat]

I had similar experience some time and did the following with good results:Go to COPIER>ADJUST>DEVELOP>BIAS.Increase setting of Bias from say 180>220 likewise adjust the values for HVT-DE to any value to + or- as you test on both copying and printing.

all of those nonsense settings mean nothing if u don't follow a "CALIBRATION" schedule

[Sahdy]

I installed the PCL5e-c_6_v8.80_v6.80 , think it the latest. Still the same proplem.

pls note: the machine is ir 6000dn not B/W not a colour.
so how to CALIBRATE

[teckat]

I installed the PCL5e-c_6_v8.80_v6.80 , think it the latest. Still the same proplem.

pls note: the machine is ir 6000dn not B/W not a colour.
so how to CALIBRATE

iR6000dn is a B&W/ no kidding

[COPIERTEC ASSOCIATES]

Can teckat assist me to illustrate how calibration is done in b&w ir6000dn coz i have never done the same before.And as earlier on said when i tried COPIER>ADJUST>DEVELOP,with success am abit puzzled thanx.

[vigour]

you should check if your door specs are correctly entered.
someone might have been playing with some values.

1 look around under additional functions > printing, there is something there, maybe printing quality >toner save.

2 from the PCL driver, go to printing properties >printing preferences> quality, then select an objective,
click details, then you will see a choice to turn on toner save.

the other drivers are slightly different.