i am trying the print/copy interface to a coin vend.
what are the hardware needed?
i am trying the print/copy interface to a coin vend.
what are the hardware needed?
You need gum gloves if you won't stay a live!
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
what I meant is what are the cables and connectors needed to connect coin/card vend kiosk to c2020.
COPY CONTROL INTERFACE KIT-A1 [3726B001AA]
cost=MSRP-50.00 /Open Market=38.00
can not installed if Copy Card Reader C1 is installed
PIC SHOWS INTERFACE KIT-A1 SET-UP/
u also need a cable from your Coin Box vendor from exterior connector shown to Coin Box/ believe it a 9pin-male dvi
CCC1.jpg
3rd parties can connect control terminals to current Canon imageRUNNER
ADVANCE devices.
includes cost accounting terminals from Equitrac and other 3rd party cost accounting
devices such as Entrac as well as Coin Boxes.
Service Mode Level 2 > COPIER > OPTION > ACC > CC-SPSW to 1 to enable the Control Device
this pdf is also for C2020>>>TP09 431a[1].pdf
Last edited by teckat; 09-25-2011 at 05:25 AM.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Yeah?? Your model is IRA c2020?I'm not shore is this posible on this model.I work with this kit on this models:
compatibility_issue_cabling.pdf
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
yes it is/see below
click on pic for better view
opt.JPG
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks