Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 3 123 LastLast
Results 1 to 10 of 22
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Nov 2010
    Posts
    95
    Rep Power
    15

    Unhappy problem in IR 6570

    hi all .........

    i have i problem with my device 6570 >> my problem is :

    When I open the device and I want to start copying using the upper door the picture shows a white (( no writing in the paper ))
    then I turn off the device and re-run it again, then the image appears ..

    what is my problem !!!!!!!


  2. #2
    Service Manager 10,000+ Posts
    problem in   IR 6570

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,153
    Rep Power
    213

    Re: problem in IR 6570

    Quote Originally Posted by bluesky2000 View Post
    hi all .........

    i have i problem with my device 6570 >> my problem is :

    When I open the device and I want to start copying using the upper door the picture shows a white (( no writing in the paper ))
    then I turn off the device and re-run it again, then the image appears ..

    what is my problem !!!!!!!



    your talking about paper tray selection ??

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Service Manager 100+ Posts
    Join Date
    May 2008
    Posts
    229
    Rep Power
    22

    Re: problem in IR 6570

    Quote Originally Posted by bluesky2000 View Post
    hi all .........

    When I open the device and I want to start copying using the upper door the picture shows a white (( no writing in the paper ))
    then I turn off the device and re-run it again, then the image appears ..
    upper door? you mean ADF or BYPASS?


  4. #4
    Trusted Tech 50+ Posts
    Join Date
    Nov 2010
    Posts
    95
    Rep Power
    15

    Re: problem in IR 6570

    no ..

    i talking about a copy paper using upper door

    the paper when out in finisher it's out with no write

    but

    when i switch off the device and re-run it again >> and copy a paper with upper door ( feeder ) the paper when out from finisher have a write no problem


  5. #5
    Service Manager 100+ Posts
    Join Date
    May 2008
    Posts
    229
    Rep Power
    22

    Re: problem in IR 6570

    Quote Originally Posted by bluesky2000 View Post
    no ..

    i talking about a copy paper using upper door

    the paper when out in finisher it's out with no write

    but

    when i switch off the device and re-run it again >> and copy a paper with upper door ( feeder ) the paper when out from finisher have a write no problem
    how about copy a paper with lower door (glass)? NO PROBLEM?


  6. #6
    Service Manager 10,000+ Posts
    problem in   IR 6570

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,153
    Rep Power
    213

    Re: problem in IR 6570

    Quote Originally Posted by bluesky2000 View Post
    no ..

    i talking about a copy paper using upper door

    the paper when out in finisher it's out with no write

    but

    when i switch off the device and re-run it again >> and copy a paper with upper door ( feeder ) the paper when out from finisher have a write no problem



    check this setting> for Potential controller
    Copier>Option>Body>PO-CNT
    it should be set at "1"


    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  7. #7
    Trusted Tech 50+ Posts
    Join Date
    Nov 2010
    Posts
    95
    Rep Power
    15

    Re: problem in IR 6570

    how about copy a paper with lower door (glass)? NO PROBLEM?
    Also the same problem ...


  8. #8
    Trusted Tech 50+ Posts
    Join Date
    Nov 2010
    Posts
    95
    Rep Power
    15

    Re: problem in IR 6570

    thanks all for help >>


    can u explain to me how can i do that

    check this setting> for Potential controller
    Copier>Option>Body>PO-CNT
    it should be set at "1"



  9. #9
    Service Manager 10,000+ Posts
    problem in   IR 6570

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,153
    Rep Power
    213

    Re: problem in IR 6570

    Quote Originally Posted by bluesky2000 View Post
    thanks all for help >>


    can u explain to me how can i do that

    check this setting> for Potential controller
    Copier>Option>Body>PO-CNT
    it should be set at "1"

    go int to service mode


    1) Press the asterisk key (*) on the operation panel.
    2) Press 2 and 8 simultaneously on the numeric keypad.
    3) Press the asterisk key (*)on the operation panel.
    SM.JPG

    then highlight each screen tab>>>>> Copier>Option>Body>PO-CNT


    call for a tech if not familiar with this operation


    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  10. #10
    Trusted Tech 50+ Posts
    Join Date
    Nov 2010
    Posts
    95
    Rep Power
    15

    Re: problem in IR 6570

    thank u man

    i do it it's work ]

    but a paper when out from finisher it out badly too much >>

    when i change it form 0 to 1 .

    again thank u so much >>>>>>>>>


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here