Canon IPF 700 Cyan doesn't print good, need to be cleaned, what print head "a" or "b"? I just don't want to waste ink cleaning both, can somebody help
Canon IPF 700 Cyan doesn't print good, need to be cleaned, what print head "a" or "b"? I just don't want to waste ink cleaning both, can somebody help
Do you know if "a" only for mbk and bk?
LEFT for Cyan
SEE PDF...........
click to openiPF700.pdf
CLEAN.JPG
Calibration through GARO Status Monitor:
The “Maintenance tab” in the GARO Status Monitor utility is comprised of Printhead cleaning, Printhead adjustment and media feed amount adjustment.
There are>Test prints that can be printed from the “Maintenance tab” on the GARO Status monitor utility.
If there is a print quality problem, users can print a nozzle check print from the GARO status monitor to see if all nozzles are firing properly.
If there are missing lines in the nozzle check test pattern, a nozzle might be clogged.
Users can then go through the maintenance procedures like Printhead cleaning,
Printhead adjustment and Media feed amount adjustment available from the GARO Status Monitor to remedy the problem.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks