Jam in cassette 3 ir5000

[Sahdy]

check Cassette 3 --retry sensor PS21


01--1005--2334--2335--0--0105--3--108655--a4 r
number of jams--date--time--clear time--location--code--paper source--total copy--paper size

delay jam>0 is for copier>0105 delay jam>3 is cassette> for 4R Paper

is your tray 3 set for a4R Paper ?????????????



is this the paper size u have in this tray = a4R ??

The paper size I use when it is in Cassette 1 or 2 it is A4 but when it is (the same paper) in cassette #3 it is A4R


also at:

copier>dispaly>CST_STS
width-C3 A4 R

[zoraldinho]

Are you trying to print something or doing SM test print?

[Sahdy]

Are you trying to print something or doing SM test print?

No . this happened when I copy and print and it happened most of the time.

[Sahdy]

and now when i tried to copy 9 repetitive paper from cassette #3 it gave

jam code is 0105 again
So it is a dealy jam / vertical path 3 paper sensor (PS26)

help? what is the problem with it?

[teckat]

and now when i tried to copy 9 repetitive paper from cassette #3 it gave

jam code is 0105 again
So it is a dealy jam / vertical path 3 paper sensor (PS26)

help? what is the problem with it?

forget about the vertical path sensor-

you have a p/u retry >delay from tray 3 to that sensor
1- is paper lifting to position ?
2- when u pull out tray 3 after jam code is the paper anywhere near from leaving tray ?
3-are the feed tires locked in the "up" position ??

tell tech to replace these parts below

#8-Vertical Path Roller 0 ==FF5-9964-000
#9-Vertical Path Roller 1 ==FF5-9965-000
#2-Sensing Plate========FF5-9842-000
#26-Sensing Plate========FF5-3002-030
(Quantity 2)
#25-Sensor Mount========FF5-2990-020
(Quantity 2)
#20-Bushing============FA9-2112-000
(Quantity 2)
#4-Vertical Path Guide====FB5-2916-030
#13-Sensor---PS25=======FH7-7394-000
Vertical Path Drive Assembly==FG6-4880-000

click on pic for better view
Internal Componets 1.JPG

[Sahdy]

thanks all.

[vigour]

use tray 4 until 3 is fixed.

[zoraldinho]

use tray 4 until 3 is fixed.

[Sahdy]

It still jams with the code 0105 again

and the paper pass through the feeding roller and the separation sponage (I can hardly catch it with my finger nails from the Right Lower Cover of the machine when I open it)

[jiongpao]

use tray 4 until 3 is fixed.

this normally i try to avoid the problem when i cnt fix it or inform customer to use other tray lol but ofcause will fix it soon normally not so soon hehe